IR Board, iSight camera pinouts

[idreadful]

Hey!

Does anyone know pinouts for this:

Apple 820-1935A IR Board

and this:

Apple 820-1929B iSight Camera Board
?

I got them without cables, and found no datasheets =(

 

[ModBot Jr]

Move to the correct forum section. tonymacx86 forum index

User Builds -> Customization (forum sections)

• |
  |
  |
  V

User Builds == Confirmed [Successful] User Hardware Build Descriptions




----------------------------> Forum Rules <--

 

[idreadful]

Well, combining this (thanks to santitf)
http://www.tonymacx86.com/viewtopic.php?f=76&t=8913&start=70#p236186

and this
http://pinouts.ru/Slots/USB_pinout.shtml

I've connected IR Board to old usb mouse cable, and the receiver works.

So the pins are (counting from "V" marker). The colors are for standard usb pin colors.

1. D- (white)
2. D+ (green)
3. VC+ (red)
4. GND (black)

So if you have native cord (and don't want to solder) with that board you will have to connect wires like that:

PIN#      FUNC     IR Board cord wire color           USB cable wire color
---------------------------------------------------------------------------
1         (D+)     Brown                        -->   White
2         (D-)     Gray                         -->   Green
3         (VC+)    Purple                       -->   Red
4         (GND)    Black                        -->   Black

 

[wash34]

To connect Isight Imac late 2008 :
USB -> Camera cable
Black -> Black
Red -> Blue
White -> Brown
Green -> Purple