Installed mavericks but now some problems

[Zutx]

Hello first my specs are CPU Intel Core i7 3517U @ 1.90GHz 51 °C
Ivy Bridge 22nm Technology
RAM
6.00GB Dual-Channel DDR3 @ 798MHz (11-11-11-28)
Motherboard
Dell Inc. 033MX4 (U3E1)
Graphics
Generic PnP Monitor (1366x768@60Hz)
Intel HD Graphics 4000 (Dell)
Hard Drives
466GB Seagate ST500LT012-9WS142 (SATA) 32 °C
Optical Drives
HL-DT-ST DVD+-RW GU70N
Audio
Realtek High definition audio

Now my problems are no Audio i have tried voodoo-hoodoo kext and no luck
also i cant boot without the USB and the flags (GraphicsEnabler=Yes PCIRootUID=1 -v -f -x ) and no matter what version of chimera i install it doesn't help
lastly no WiFi or Ethernet i have tried all kexts included with multibeast for mavericks and nothing has seemed to work it'll give me an ip and say connected but i have no internet and i am stumped at this point any help is appreciated, Thanks.

 

[RehabMan]

Hello first my specs are CPU Intel Core i7 3517U @ 1.90GHz 51 °C
Ivy Bridge 22nm Technology
RAM
6.00GB Dual-Channel DDR3 @ 798MHz (11-11-11-28)
Motherboard
Dell Inc. 033MX4 (U3E1)
Graphics
Generic PnP Monitor (1366x768@60Hz)
Intel HD Graphics 4000 (Dell)
Hard Drives
466GB Seagate ST500LT012-9WS142 (SATA) 32 °C
Optical Drives
HL-DT-ST DVD+-RW GU70N
Audio
Realtek High definition audio

Now my problems are no Audio i have tried voodoo-hoodoo kext and no luck
also i cant boot without the USB and the flags (GraphicsEnabler=Yes PCIRootUID=1 -v -f -x ) and no matter what version of chimera i install it doesn't help
lastly no WiFi or Ethernet i have tried all kexts included with multibeast for mavericks and nothing has seemed to work it'll give me an ip and say connected but i have no internet and i am stumped at this point any help is appreciated, Thanks.

For audio: Google 'patch AppleHDA guide'. Follow the part to get your Linux codec dump. Then look for AppleHDA that matches. You will also need DSDT patches specific to that patched AppleHDA.

For booting: Make sure you followed this guide for power management: http://www.tonymacx86.com/mountain-...nagement-sandy-bridge-ivy-bridge-laptops.html

And you could be running into a graphics issue. Boot "-v" to diagnose. You can also try IGPEnabler=01660003 if you haven't done DSDT patches to enable HD4000.

For WiFi/Ethernet: Instead of trying random things, run DPCIManager to get your device ids.