Hackintosh Acer Aspire E5-573G-34PD

[thunderbolt]

Hi guys,

I'm trying to install Mojave 10.14.2 on my Acer Aspire E5-573G:

Intel Core i3 (5th Gen) 5005U
NVIDIA GeForce 920M - 2 GB DDR3 VRAM (and integrated Intel Graphics)
RAM: 16 GB
2 SSD (1° SanDisk 250 GB, 2° Crucial 500 GB)

BIOS is already set in UEFI, Secure Boot disabled, VT-d disabled, DVMT Pre-Allocated set to 96 MB.

I'm using these boot flags: -v nv_disable=1 dart=0 , but no success so far..It always ends up with the same error during boot (attached at the post with the efi zip). I've created the USB bootable device with TINU and Clover bootloader.

Any suggestion? Thanks.

 

[RehabMan]

Hi guys,

I'm trying to install Mojave 10.14.2 on my Acer Aspire E5-573G:

Intel Core i3 (5th Gen) 5005U
NVIDIA GeForce 920M - 2 GB DDR3 VRAM (and integrated Intel Graphics)
RAM: 16 GB
2 SSD (1° SanDisk 250 GB, 2° Crucial 500 GB)

BIOS is already set in UEFI, Secure Boot disabled, VT-d disabled, DVMT Pre-Allocated set to 96 MB.

I'm using these boot flags: -v nv_disable=1 dart=0 , but no success so far..It always ends up with the same error during boot (attached at the post with the efi zip). I've created the USB bootable device with TINU and Clover bootloader.

Any suggestion? Thanks.

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"