- Joined
- Jun 29, 2015
- Messages
- 11
- Motherboard
- Fujitsu LH-532
- CPU
- i3-3110
- Graphics
- HD 4000, 1366x768
- Mac
- Mobile Phone
I am new to hackintosh but have been lurking on all the regular sites and learning as I go. I appreciate all those who have gone before me and forged the path.
Fujitsu LH532 (under $300 for Christmas 2014)
Specs:
Intel 3rd gen I3 processor 2.39GHz
Intel HD Graphics 4000 1024MB
Crucial 16gb kit(DDR3-1600) $75.79 on amazonAzureWave Broadcom BCM94352HMB 802.11/ac/867Mbps WLAN + BT4.0 Half Mini PCI-E $29.80 on amazon
Total spent around $405 for a kick ass machine
Working:
Everything but battery status
Not working yet due to not caring:
Card reader (not sure if even possible)
I followed this guide from RehabMan (Super helpful moderator):
http://www.tonymacx86.com/el-capitan-laptop-support/148093-guide-booting-os-x-installer-laptops-clover.html
I used option 1
In: /Volumes/CLOVER EFI/EFI/CLOVER/kexts, I have the following kexts fakesmc, GenericUSBXHCI, RealtekRTL8111, and VoodooPS2Controller
Here is the config.plist to use:
View attachment config.plist
No boot args, just boot from Thumbdrive and install. After install you will need next utility and the following kexts for the wifi and bluetooth:
View attachment Patch Broadcom WiFi kext.app.zip
View attachment BCM4352 WiFi 5Ghz Patch.app.zip
View attachment bcm4352.kext.zip
View attachment bcm4352bt.kext.zip
View attachment BluetoothDevBroadcomInjector.kext.zip
For 5Ghz to work use google the following command wireless_bcm94352-110-v4.0c found here:
https://github.com/toleda/wireless_half-mini
For the sound, use:
View attachment VoodooHDA-2.8.8.pkg
You should have everything but the battery status working now. I am still working on it.
Fujitsu LH532 (under $300 for Christmas 2014)
Specs:
Intel 3rd gen I3 processor 2.39GHz
Intel HD Graphics 4000 1024MB
Crucial 16gb kit(DDR3-1600) $75.79 on amazonAzureWave Broadcom BCM94352HMB 802.11/ac/867Mbps WLAN + BT4.0 Half Mini PCI-E $29.80 on amazon
Total spent around $405 for a kick ass machine
Working:
Everything but battery status
Not working yet due to not caring:
Card reader (not sure if even possible)
I followed this guide from RehabMan (Super helpful moderator):
http://www.tonymacx86.com/el-capitan-laptop-support/148093-guide-booting-os-x-installer-laptops-clover.html
I used option 1
In: /Volumes/CLOVER EFI/EFI/CLOVER/kexts, I have the following kexts fakesmc, GenericUSBXHCI, RealtekRTL8111, and VoodooPS2Controller
Here is the config.plist to use:
View attachment config.plist
No boot args, just boot from Thumbdrive and install. After install you will need next utility and the following kexts for the wifi and bluetooth:
View attachment Patch Broadcom WiFi kext.app.zip
View attachment BCM4352 WiFi 5Ghz Patch.app.zip
View attachment bcm4352.kext.zip
View attachment bcm4352bt.kext.zip
View attachment BluetoothDevBroadcomInjector.kext.zip
For 5Ghz to work use google the following command wireless_bcm94352-110-v4.0c found here:
https://github.com/toleda/wireless_half-mini
For the sound, use:
View attachment VoodooHDA-2.8.8.pkg
You should have everything but the battery status working now. I am still working on it.
Last edited: