First Hackintosh stuck at Apple logo when installing

[Swingingman97]

Hey this is my first Hackintosh build and I'm having some trouble. I'm trying to install the Mac OS Sierra, it gets to the Apple logo and the loading bar but it doesn't progress past that. I tried it in the verbose mode and took a picture of where it is hanging up. Can anyone help me?

BTW, this is the hardware I'm running on

Asus H-170 pro/can
Intel i5 LGA 1151
Crucial DDR4 16G RAM
And no GPU

 

[Jithin.C.V]

Hey this is my first Hackintosh build and I'm having some trouble. I'm trying to install the Mac OS Sierra, it gets to the Apple logo and the loading bar but it doesn't progress past that. I tried it in the verbose mode and took a picture of where it is hanging up. Can anyone help me?
View attachment 224530
BTW, this is the hardware I'm running on

Asus H-170 pro/can
Intel i5 LGA 1151
Crucial DDR4 16G RAM
And no GPU

Post config.plist (as a file) file from your bootable USB.

 

[Swingingman97]

Here it is

 

[Jithin.C.V]

Here it is

Is this the one you are using ?? It only contains something like LegacyUSBC entries. With this config.plist nothing going to work.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>LegacyUSBC</key>
    <dict>
        <key>Firmware</key>
        <string>Mac-BE0E8AC46FE800CC-33400.bin</string>
        <key>Port Address</key>
        <integer>36</integer>
        <key>Port Silicon Device ID</key>
        <integer>24</integer>
        <key>Port Silicon Revision</key>
        <integer>0</integer>
        <key>Port Silicon Vendor ID</key>
        <integer>2599</integer>
        <key>RID</key>
        <integer>0</integer>
        <key>Version</key>
        <real>33400</real>
    </dict>
</dict>
</plist>

How you created this bootable USB ?? Please follow this guide for bootable USB creation : UniBeast: Install macOS Sierra on Any Supported Intel-based PC