Contribute
Register

B75M-D3P audio over HDMI does not work (Intel HD 3000)

Status
Not open for further replies.
Enjoy.

Only HDMI and DP are supported in the HD3000 framebuffer you are using. There is an edit you can make that provides a DVI connector in the framebuffer. See Edit AppleIntelSNBGraphicsFB Binary/d. macmini5,1 Adds DVI at port-number 0x5 at Lion HDMI Audio - Part 3c: Kext Edits - Intel HD3000 Revised.

Thanks for the link. I will take a look at it. It feels good that I don't have to return this.

However, I have a new issue I just noticed after using DSDT which will require a new thread since it is not about audio or if I can't solve it by myself.

It is about Speedstep. My multiplier is set to x16 if AppleIntelCPUPowerManagement is installed (vanilla). Therefore it only gives me 1.6Ghz max. If I remove AICPM, it kinda works but only x16 and x33 - no other steps.

SSDT options are for i5 and i7 CPUs only .. im not sure if there is a way for i3s.

Anyway, thanks boss! You just saved me some restocking fees!
 
Thanks for the link. I will take a look at it. It feels good that I don't have to return this.

However, I have a new issue I just noticed after using DSDT which will require a new thread since it is not about audio or if I can't solve it by myself.

It is about Speedstep. My multiplier is set to x16 if AppleIntelCPUPowerManagement is installed (vanilla). Therefore it only gives me 1.6Ghz max. If I remove AICPM, it kinda works but only x16 and x33 - no other steps.

SSDT options are for i5 and i7 CPUs only .. im not sure if there is a way for i3s.

Anyway, thanks boss! You just saved me some restocking fees!
It's another thread. AppleLPC is not loading and SBUS is missing BUS0, can be fixed with dsdt edits.
 
Status
Not open for further replies.
Back
Top