Search results

My friend put in a real Apple airport card with an m.2 adapter. It works, but he had to remove the inner casing. This sentence is baffling: "could not throw off a list of cakes that came in handy?"

I have the same card. I was able to use Bluetooth in 10.13.4 (SMBIOS iMac 17.1), albeit with a terrible signal. Now that I have upgraded to 10.13.5, my Bluetooth device does not get recognized. I have under EFI/CLOVER/kexts/Other BrcmFirmwareData.kext BrcmNonPatchRAM2.kext BrcmPatchRAM2.kext...

Great! You have some interesting stuff going on with your audio device. Mine works, but all I did was inject 11 under Devices/Audio. I am also surprised that you do not have Devices/USB/FixOwnership enabled. I seem to need that, but I don't need any inject options enabled in Clover for USB...

Thanks for pointing out my errors. I changed my "port count" to 25 (after fixing my SSDT, I noticed that USB-C probably needs both SS and HS components of USB, and SS09 has port count 25). A new version has been uploaded with the suffixed "_fixed.dsl". For some reason I still cannot get things...

Thank you for confirming that! I thought so. I used to have an internal DVD drive connected to one of the internal USB 2.0s. Now I have an SDCard reader (It shows up as "Generic")

Could you please provide your original SSDT.dsl before compilation into aml? You only provided the decompiled version, but I'd like to compare SSDT-UIAC-ALL.dsl with your reduced version, and with mine. I attached my dsl SSDT-UIAC with commented ports for posterity. My hotplug USB-C (Port HS09)...

I have the same board. When I did my USB checks, HS12 seemed to be active. You do not have this in your dsl. I am not sure what it is (probably internal front panel USB2.0). From my tests: HS01 : Internal USB 3 HS02 : Internal USB 3 HS03 : Right port (2) HS04 : Right port (1): indexed...

The uia_exclude boot options seems to be in error. The HS09 is important for USB-C. : In Clover Configurator Boot Tab, enter in Custom Flags: uia_exclude=HS03;HS04;HS09;HS07; I tested all usb ports using IORegistryExplorer. Did I miss something?

I got iMessage working by following this guide: https://www.tonymacx86.com/threads/an-idiots-guide-to-imessage.196827/ I think an easy thing to miss is having a working NVRAM (persistent RAM after power offs). I could not get native NVRAM working, so I just use the fake NVRAM plist that gets...

I am still looking for a solution to this issue. I was able to get iMessage working and iCloud. I also replaced my Wifi / Bluetooth board with a BCM94352Z module. I cannot get the bluetooth working. It shows up (I can enable/disable it), but the connections are flaky at best. (If I put a...

I alright bought it. It is a BCM9435SZ. It works except for bluetooth. The bluetooth appears to be active in the operating system, but the range is absolutely terrible. It only recognizes devices when they are immediately next to the machine, and even then the signal is messed up.

I am working on it. I have almost the same build except with an Intell 8100.

I have the z370n wifi. The wireless card is a module. I swapped mine out for a broadcom chip (BCM94352Z) and it is working. Bluetooth had hiccups but I think it is ok now (a matter of finding the right kernel extensions). I went for an Intel i3-8100 CPU. Video acceleration is working. Overall...

Switching to iMac 17,1 using Clover did the trick. I no longer have graphics problems with Safari. Not yet working: USB-C Bluetooth on my Broadcom BCM94352Z (WIFI is working) Did you need to do anything special for your dvd drive (optical drive)? Mine is recognized in About This Mac but not...

Also not working with a GA-Z370N-WIFI-1.0.

I also have an i3 8100 and got sleep and video acceleration working. See my original post Success- Coffee Lake i8700k GA-Z370N-wifi: I had to set the machine to iMac 17.1, otherwise I had some occasional video errors (I had to reboot due to a shaky screen/flickering using Safari and Calendar...

My entire EFI as per request (although you could probably just get the Clover version I have and have the same thing...) As I said before, the config.plist is pretty much the one that came with Clover plus the aforementioned graphics-related things. Oh wait... it seems I cannot upload tar.gz or...

My build is a Board: Gigabyte Z370N Wifi CPU: i3 8100 Memory: 16GB DDR4 2400MHz Crucial Technology Drive: Seagate 320GB 5400.6 RPM formatted with Journaled HFS+ GPT Clover: Classic Edition 4.60.0.0 Kexts: (I just copied everything lazily from the Clover USB stick) AppleALC.kext...

Sleep worked out of the box for me. Same main board, different processor: i3 8100 on High Sierra 10.13.2

Installation of macOS High Sierra 10.13.2 worked flawlessly. iMessage only works with a proper wireless/bluetooth module, so those questions cancel each other out. I used the Coffee Lake i3 8100 CPU. The only issue I have is the onboard graphics acceleration. As soon as I get that working, I...