Search results

Hello Buttadeus, I had the same problem for Mojave. Swapped GTX 970 for a RX 560 and then sleep/wake was not working anymore. I solved the problem deleting the com.apple.PowerManagement files in /Library/Preferences/, see this post. Now there is a little difference from before, the computer...

Hello all, I noticed that if fixUSB is disabled then the machine can shutdown but of course USB is not working properly: there are some ports working and some others don't. Any suggestion, idea or advice ? Thanks in advance for any help. regards John

Hello all, I successfully installed El Capitan 10.11.1 on GA P55-UD6 using UniBeast 6.1.1. Everything is working except wake up from sleep and shutdown. Wake up reset the machine and after a shutdown the machine automagically restart. Actually I cannot stop the machine, I have to power it...

I have found this post made by Tonymacx86 http://www.tonymacx86.com/el-capitan-desktop-support/179028-post-your-multibeast-8-screenshots-config-files.html#post1153130 regards john

Hello all, I still have a quite old Gigabyte GA-P55-UD6 based build and no plan to enhance it yet. Currently I am working with Yosemite 10.10.5 but I would like to move to El Captain. I wondering if I can use Multibeast 8 to upgrade to El Captain and if is there someone that can point me to...

Hello all, thanks for sharing your experience ! May be it is a silly question but I didn't read yet the whole thread: What about the touch screen, is it working on OS X? regards John

Hello P1LGRIM, the loaded kext is:/System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8254XEthernet.kext And the card is installed in pciex4_1. Thanks again for your help john

Thanks P1lgrim for your help. Unfortunately even with on-board NIC disabled in bios, the NC360T card behave as before, not able to go at 1 Gbit/s. The two ethernets are visible as en5 and en6: en5: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500...

HP NC360T NIC works only at 100 Mbit/s [SOLVED] Hello all, I just installed an HP NC360T NIC in one PCIe slot. The card works out of the box without any configuration, it gets almost immediately the IP from DHCP of modem-router. But ... it sports only 100 Mbit/s where supposed to support also...

Some news: I just installed HP NC360T NIC on PCIe slot. The new card worked out of the box without any configuration. It almost immediately connect to modem-router and get IP from DHCP. But still there are some problems. In Network Utility app, the card has a link speed of 100 Mbit/s...

Thanks for your help. I am using a machine with patched DSDT. I tried to change driver to the RealtekRTL8111.kext and RealtekR1000SL.kext, but I have the same problem (and same speed). With RealtekR1000SL it is a bit better because the machine is able to define a self-assigned IP. I don't...

[SOLVED] Lnx2Mac RealtekRTL81xx doesn't connect at startup but only after sleep/wake cycle Hello all, few days ago I changed modem/router to support VDSL. I had to use the HW provided by my ISP (Technicolor AG Plus VDNT-S). The strange behaviour is that my mackintosh (the mobo uses Realtek...

[SOLVED] Carpal Tunnel Syndrome and Mad Catz MOUS9 nigthmere Hello all, I am getting old (see my avatar). I got carpal tunnel syndrome, usage of Apple magic mouse is very painful for me. So I decide to try the Mad Catz MOUS9 that a friend borrowed to me. I have to admit that it is very...

No problems with my build. Unibeast install with safe mode and then after multi beast execution the system can boot without any parameter. Please notice that I have same video card from same vendor. On the other hand, I can get only 24 fps in CINEBENCH, how many you can obtain ? regards -- john

Hello again tamorgen, Just updated all the kexts following the instructions in the link but the performances didn't increase. May be it is the best fps that such card can produce. Regards john

Thank you tamorgen for the useful information. At the end I decided to reinstall Lion completely. Now I am writing from the fresh new Lion installation. It was not a pain because I have the Users directory in a separate HDD. After the installation the CINEBENCH fps was only 4.42 fps. But then...

Hi all, sometime ago I decided to replace my video card and move from Zotac GeForce 9800 GT to EVGA GTX 460 FTW. I ingenuously thought that the installation procedure was just to swap the cards, boot and then run MultiBeast. But this way doesn't work at all. Of course after new card...

Hi all, I read many threads describing sleep issues and solutions, but unfortunately none of them helped me. So i decided to start a new thread specific for GA P55 UD6. With SL 10.8.6 everything was working smooth out of the box using MultiBeast. After Lion installation sleep is partially...

The problem is due to the case sensitive file system. I just moved it in a USB key and it is working. regards -- boydon

Hi all, i tried to execute cinebench but I got a lot of errors and then the application crashed. Do you have any idea why?