Search results

The one you linked is more than 3 times the price of the monitor the OP asked about. The UP2414Q is a good monitor but the price is outrageous in comparison to the P2414H. For the same price you could get 3 P2414H monitors. To answer the OP's question more directly. The P2414H is a good...

I am using 2 x Dell U2412M on GTX 760, they are amazing monitors. I think the only downside to the 2414 is they are 1920x1080 instead of 1920x1200. The display controls are amazing, you can customize 2 of the keys and it allows the onscreen controls to be rotated! The extra USB ports are great...

Install GenericUSBXHCI.kext.

My B75M-D3H board also started doing this. Deep sleep killed the network. Have switched both machines to the official Reaktek driver and seems fine so far.

Same issue here on a G87M with realtek. Have switched it to the official realtek driver to see if that helps.

Sounds suspiciously like a Hard disk failing. If you had a spare 2.5" disk/ssd laying about I would see if swapping it out fixes the problem. If not you could check the smart status and see if it's "Reallocated Sector Count" is more than zero. I use DiskTools Pro to check it, but there may be...

Try the audio kext from Multibeast 6.1.0 if you did not already. It uses the 10.9.1 AppleHDA kext which does not seem to have this problem.

Swapped for ASUS GTX 650 Ti, works every single time now.

No that does not help. Its so random it must be a hardware issue. I thought I would do a sanity check. I installed debian linux on a spare disk, installed the Nvidia drivers, and it worked fine, rebooted and the Xorg server hung at start up. Rebooted several time same deal, its segfaulting on...

It gives this. 2013-07-06 20:30:28.708 defaults[335:707] The domain/default pair of (/Library/Preferences/com.apple.windowserver, GLCompositor) does not exist I just tried rebooting a few more times, it seems mashing the keyboard and yelling at the screen work just as reliably as booting...

Found this in the console logs 6/07/13 7:57:52.000 PM kernel[0]: NVDAStartup: Web 6/07/13 7:57:52.000 PM kernel[0]: NVDAGK100HAL loaded and registered ... 6/07/13 7:58:00.000 PM kernel[0]: NVDA(Video): Channel exception! exception type = 0x20 = DMA Engine Error (PBDMA Error) 6/07/13...

It does not matter if I use 1 or 2 displays. I have swapped out the motherboard for a H61M-D2-B3, which made no difference. I have found I can boot into OSX with no problems if I boot to single user mode, then reboot. But if I boot into full QE/CI using the nvidia then reboot it will stop...

Ok I spoke too soon, I connected the 2nd monitor, which showed up fine. Rebooted and it switched the order of the monitors. I set the monitors round the "right" way switching left and right, rebooted again and now its broken again. So obviously its something to do with the Monitor settings...

Ok I solved it myself. The problem was I was working under the assumption that this card should work with GE=No like the 1GB version. Also I forgot that specifying parameters at boot overwrites the options give as kernel options in the chamelion plist. So I was typing GraphicsEnabler=No...

NVIDIA 650 Ti 2GB Not working. [Solved] Ok this is a really odd one. I have built a machine with a Gigabyte 650 Ti 2GB (which replaced a 1GB version of the same card). The first couple of boots it worked fine, but I had to manually type PCIRootUID=1 GraphicsEnabler=Yes on the boot prompt to...

I had sound but mute didnt work at all with 10.8.4 and the ALC887 driver from multibeast 5.3.1. Switched to Voodoo HDA 2.8.4 and it all works fine now.

Vmware fusion has 2 issues. The shared folder are alot slower than parallels, as in can become unusable/stall on large transfers. And the graphics are still badly implemented, the vmware driver hangs alot still and is much slower than the parallels one. As for 7 vs 8 on parallels, I noticed...

You cannot do it without hacking VMware 9. In anycase it runs like a dog, it was never intended to run under windows, and there is no QE/CI. Also USB does not work well at all. All I have ever used it for was creating a Unibeast disk, but even that was a nightmare. Just make a hackintosh if you...

Luxmark does the same for me. Just reinstall the drivers from Nvidia to go back to "normal". The OpenCL patch just modifies one of the files in the Nvidia kexts.

EDIT: Never mind, if I change the Render to Apple Software it gives the same results. Just to report same deal here with a 650 Ti card. No full GL past 2.1.