Search results

add the Z77X-UD3H please :)

where is the Z77X-UD3H?

Use any case you want, just make sure both the motherboard and the case are for example ATX. If you´re on a budget go with the GA-Z77-DS3H or if you have more money to spend then go with the GA-Z77X-UD5H.

:')

The Z77 boards are Ivy Bridge(3rd gen. Intel Core cpus) and Z68 is Sandy Bridge(2nd gen. Intel Core cpus) and the 3770k aswell as the 3570k are Ivy Bridge, but they will work just as well on Sandy Bridge boards. The reason that they´re not in the guide is because is for the Ivy Bridge...

Looking great!

Yes but your audio probably wont work and only 2 of your usb 3.0 ports will work :/ but other then that it´s a great board!

The Lanboy Air!!

Does it have to be a specific one?

I don't know anything about that board, sorry :/ After the install you still need to run multibeast, select userDSDTfree installation and then pick your drivers, pick the sound drivers within "without DSDT".

I don't understand why you would want two ethernet ports? What is that usefull for? :o

I want something better, the best option would be the GA-Z77X-UD3H, do you know if it's possible to get the audio working?

Then you have to make the jump to the GA-Z77X-UD5H :/

Don't use the GA-Z77-D3H, it has unsupported VIA audio, you could use the GA-Z77-DS3H or the GA-Z77X-UD5H. You don't need a DSDT for the Z77 boards :D

Try putting the mb on the mb box and only using the core components(Mb, CPU, cooler, ram, 8 pin+24 pin cables). Is the cpu cooler fan spinning? Can you see the POST screen?

Just take the GPU's recomended power and add 100-150w :) then you have some room for upgrades too.

It's fully working but it's quite a low end board, but it's cheap!

Anyone?

Sounds like the motherboard failed, have you tried using just one stick if ram? Try all 4(?) slots. That happened to be before, but it looped, just send it back if you have tried everything else.

This is how you can check if your PSU is working: 1. Unplug all cables from the PSU. 2. Grab the 24-pin connector and a paperclip. 3. Find the pins to which the green cable and one(doesn´t matter which one you pick) black cable are corresponding to and put each end of the paperclip into...