I have updated the bios to the latest and Im still good. As for the 3.0 problem I had the same thing and I fixed it by loading newer usb 3.0 kext from the latest multibeast. I cant remember which one but I will take a look when I get home and post it.
My post is number 138 on this thread, I am quoting it here but there is a screenshot on that post of my multibeast settings. Like I said before just use lion multibeast for audio and use new multibeast for rest of the kexts.
You get 4 options in bios because one of them is the uefi boot partition for windows 8, multibeast has no uefi boot support and will not recognize it. You say you get stuck on the apple logo, I was getting that as well and I posted a guide in this thread on how I went about getting my hackintosh...
I recently updated to 10.8.3 and its all good. I installed the combo update from here http://support.apple.com/kb/DL1640 as posted on the tony mac forums/news. Before I hit reboot I ran MultiBeast 4.6.1 Lion found here http://www.tonymacx86.com/downloads.php?do=cat&id=3 and installed the audio...
I just ran the following from the new multi beast. The gtx 670 support for open cl driver, and the sandy bridge ssdt for turbo boost and everything is fine.
Oh and I also updated chimera to the latest.
Screen shot attached to post.
Is there anything in the new multibeast that we should be using/adding? I see there is gtx 670 drivers and enablers and open cl, is this safe to add or is the native support good enough?
I am on the same bios and its working fine. Try "cpus=1", I would always get the same slowness unless I booted with those paramiters. This will restrict you to using 1 core, if you want to fix that you will need the VoodoTSCSync.kext to enable all cores. Please note since its default 11 for i7...
Hi I have my hackintosh built, running ML no problems however I have an asus pci-e card Model#PCE-N53 with the following chipset Ralink RT5592 and I would very much like to get this working instead of tethering all the time to my iphone. I tried looking online and did not find anything, so I am...
You should be good, just be sure to add good thermal paste. Although for this kind of build I would highly recommend a water cooler, corsair and thermaltake have been getting good reviews, just do the research on the different models they offer.
Yea hard drive will work, 10000 rpm is just its speed has nothing to do with hackintosh. GTX 600 series work out of the box on mountain lion so no need to do any extra settings or tweaks. Yea I will be running finalcut pro sometime too.
Just make a ML boot USB with unibeast, how to do that...
OMG you are awesome. VoodooTSCSync.kext is all I needed to get everything to work, posting this from my new hackintosh build, yea I set it up with the cpus=1 paramater so I did not have to muck around with the bios for hyperthreading and cores, afterwards installed unibeasts and required kexts...
What command lines are you guys using to start the installer. I always get the apple logo stuck on the spinning logo screen and it freezes or goes black. I would like to do a fresh install of ML on an asus sabertooth x79 mobo with i7 3930k and a gtx 670 ftw. My bios is latest and hdds are set to...
Yes I am running multibeast, I am aware of the cosmetic cpu unavailable. However I cant get mac to boot properly without the cpus=1 flag or else it freezes on the loading screen. It only runs 1 core and crashes sometimes, how do I enable my cpu to work at its full 6 cores 12 threads, I am on an...
Everything ok on my build except..
Hi, I am new to hackintosh but i managed to get everything set up properly on my asus sabertooth x79 mobo, one thing though I can only get it to work with cpus=1, if i dont put those flags in it gets stuck on the apple logo screen with the spinning wheel...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.