Search results

Haswell HDMI Audio I really wasn't thinking clearly before - my apologies. I had been doing the ALC892 HDA patch not the hd5k HDA patch command. I am currently not using any audio injection in Clover. With the HDA patch command alone, I get HDMI audio on my NVidia. Using the .command you...

Haswell HDMI Audio I just tested this again (finally got my device unlocked by performing a firmware flash...). The KP only happens if I hotplug the cable. If I boot with it it seems fine. I've attached the KP anyways. I also attached some of the last lines of the System.log. Interesting to...

Haswell HDMI Audio I had to because I was running Mav. I presumed you would want IOJones from 10.8.5 :) I had tried patching AppleIntelFrameBuffer@1 before, I'll try it again. I used the audio_hdmi_hd5K-hda-85_patch.command in order to get onboard audio to work at all. Unfortunately...

Haswell HDMI Audio Reinstalled 10.8.5 to get this. Hope it helps! Note that the bottom connector can't be used at all - instant KP if a cable is connected. The top connector works, but without HDMI audio, even after trying every patch I could. I believe that this IOJones is with the SSDT...

I'm running a build with a GA-H87N-Wifi. Is there any advantage to making a DSDT? I've heard things like power states and the such, but am unsure as to if it is needed. Thanks.

Haswell HDMI Audio Thanks for the advice. I got HDMI audio working fine on GTX 660 in 10.8.5. I couldn't get the bottom HDMI on the h87 working at all (KP), and the top one still didn't have HDMI audio. I'm in the process of reinstalling with Mav. I will post again what I have running...

Haswell HDMI Audio I'm cranking away at this trying to get my H87N-Wifi working properly. I'm using Clover to boot, but first things first I'm trying to get the HDMI port closer to the motherboard to not cause a KP when an HDMI cable is connected. This happens with the stock kext and every...

Were you able to boot without a USB drive? I just copied my org.chameleon to my USB UniBeast drive and called it solved. My TM isn't working now for whatever reason though.

I got it booting with UniBeast plugged in. Satisfactory for me, as ML is supposedly GM right now, and should ship 'hopefully' within a week.

I have no idea what happened to my system, but I am in the exact same boat. However, I figure I am going to be reformatting before the end of June anyways when ML drops officially. I can get it booting using a UniBeast formatted install disk, so that is good enough for me. In the mean time, I...

Exact same thing happened to me. I migrated last week or so to a new MBA, and finally rebooted my hack last night. Or tried to reboot. It just went into boot0 :gpt, boot0: test, boot0: test, boot0: done. I don't have a Lion installer around atm, going to try one more time based on the guide...

Sorry for the necro. Unfortunately, doing that does not work. I did it myself this last week. Thankfully, I had another stock MBA lying around, so I compared my /S/L/E to the brand new one, and deleted any extra extensions. Wasn't sure if there was anywhere else to check as well...

Can you confirm if graphics are fully working? I believe playing a DVD (or simply opening it?) with DVD player is a test. I have also used Source games (Portal 2).

Man, this was not an easy processes! Finally got dual-display working with my Sapphire RadeonHD 5850 Xtreme 1GB card with Graphics Enabler = Yes such that DVDPlayer, steam games, VDADecoder etc works. The card has three outputs, DisplayPort, HDMI, and DVI, and looks pretty much the same as a...

Created a custom ATIConfig personality to fix the GraphicsEnabler=No problem, and it fixed the display black at startup. I still have the other two problems though, randomly it decides to not use the kextcache, and if it doesn't, I have to sleep + wake for input to go through.

Any ideas?

Hello all, Got my rig set up a few weeks ago with UniBeast + Custom Beast. My exact routing to get everything to the state it is now was: Install with UniBeast Run CustomBeast Disable GraphicsEnabler in org.chameleon.Boot.plist (This allowed me to use both my monitors, with coregraphics!)...

This worked perfectly for me. I am also using a Gigabyte X58A-UD3R motherboard. I readded the AppleHDA.kext to the S/L/E and now I can use both onboard and the audio output from the X-Fi. I cannot figure out how to get optical in working on the X-Fi, however (if it is even possible).