Search results

I gave up on the 210 and went back to my orig card the Sapphire 6450, it worked right out of the box with 2 monitors. I did have to tweak my chameleon file a bit but with the help of this other post I got it working. http://tonymacx86.com/viewtopic.php?f=15&t=35803 Thanks for the help all the...

I can confirm what pscomp said, my card is working now with 10.7 as well. Sapphire Radeon HD6450 - working vga-dvi did not test HDMI nor HDMI audio My org.chameleon.boot.plist file reads as follows <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN"...

Stork Yes I have the EVGA 210 Geforce 210 1GB-DDR3 card that I purchased from Newegg by following the Tonymac link in the builds section. Card works fine OOB with Unibeast and Lion 10.7 However if I do the combo upgrade to 10.7.3 I get a black screen, I subsequently have to boot with -v...

Update: So while waiting for someone to lend some assistance :thumbdown: I decided to go ahead and experiment. As long as I install Lion via unibeast and do not update to 10.7.3 I find I can leave the EFI string out of the cameleon boot file. However if I upgrade without the EFI string in...

Forgive my noobieness but I have a question. I am using an EVGA GFX210 1GB-DDR3 card right now by injecting the EFI string into the chameleon.boot file. It is working but only the DVI, the VGA connector simply gives me a black screen. If someone could give me a little insight into this it...

P.S. Here is the thread I followed to get my Geforce 210 working with my system. http://www.insanelymac.com/forum/index. ... pic=257446

Ok, your help is needed. I have the EVGA GFX210 Nvidia card working by injecting the driver into the chameleon boot file. However I have not been able to get the VGA-DVI working together. Also people are telling me this is not the correct way to use the Nvidia cards? Something about patching...

That may be, but there are no diffinative articles on how to insert these patches you speak of into the DSDT, I am using a DSDT from this board, and am researching how to put the video driver into it, but not having much luck. Injecting the device into the chamelon boot was the only way I could...

Just an FYI, my 210 was not working OOB and took quite a bit of work to get it working at all, I still only have 1 monitor working with it as well. This is the Evga GFX210 off of the recommended graphics card list. I ended up having to inject my driver using OSXTools.

Do a search on Graphics Card Injection, this is what I used, sorry I forgot to bookmark the page so I don't have it to point you to. I used the OSXTools application "do a google search" to extract the video string, you will see the option on the first screen when you use OSXTools, I then copied...

UPDATE: Figured out I had to use OSXTools to read the strings from the video card, injected into the Extra/org.chameleon.Boot.plist :headbang: Card is working well now, with QE enabled as well. CCC'd the drive just in case I screw it up again.

Purchased an EVGA 210 1GB-DDR3 listed on the TonyMac builds page. Booted from Unibeast using -v command, got to white screen with Apple Logo-No mouse cursor, and screen is locked. Booted again using -v -x GrpahicsEnabler=No was able to get in and install OSX. Booted again from Unibeast, this...

Update: Got the Evga 210 1GB DDR-3 card recommended on the links for the custo build. Booted Unibeast with -v option, screen hangs on white with Apple logo, disk activity but no mmouse cursor, locked. Booted Unibeast again, this time with -v GraphicsEnabler=No command, this time I can go to...

Oops, spoke to soon, I have sound but it POP's the speakers some of the time when playing a sound. This is a Rev 1.0 Gigabyte board as reading the posts around "a lot of them :(" on this subject say they make a difference.

@TheSMartGuy Tried your method below, went to the S/L/E folder and deleted the two files named AppleHDA.kext and ALC8xxHDA.kext by moving them to the trash. I did not re-boot. I then launched Multibeast and followed your instructions including the selection of the System Utilities "I assume...

Try reading this article, it is not easy but may work for you, I have had no luck so far using it with GE=yes but it might give you some information. viewtopic.php?f=15&t=35803&hilit=hd6450

I purchased the Sapphire HD6450 1GB DDR3 card and could not get it to work with GraphicsEnabler set to yes. I am using the Gigabyte GA-H67-D2-B3 board. I tried going into windows and dumping the bios using the method suggested by lisa_user but the program will not let me dump the bios on the...

Greetings, I have built a system based on the Gigabyte GA-H67M-D2-B3 System board Processor is an i5-2300 CPU-4GB-Ram and two 300GB hard drives, one for Lion and one for Win7 I purchased the Sapphire 6450 1GB DDR3 card on the recommendation of others, however I could not get the card to work...