Search results

How much voltage are you at and what are you max temps under load? What are you using to test stability? There becomes a point of diminishing return with IB, voltage, core clock speed and heat. Depending on your cooling solution I'd say 1.35 volts is safe if load temps are controlled under a...

How much are your overclocked? There is my results at 4.6 ghz, custom water cooling loop, vanilla evga gtx 580 1.5bg (stock clocks). My 3770k is terrible and needs a ton of volts to go 4.6ghz IMO which is why I havent gone further. 1.35 volts "offset" overclocking is about my limit even though...

http://www.tonymacx86.com/mountain-lion-desktop-support/86807-ml-native-ivy-bridge-cpu-gpu-power-management.html Read this thread regarding ssdt/overclocking/sysdefs and Ivy Bridge CPU Power management.

What system definition are you using? I would suggest adjusting all 4 cores the same value if using 3,1. If using minimac 6,x or iMac 12,x or 13,x a modified SSDT will be required to over-clock. Do you have EIST (speed step) enabled in the bios. Unless using the later sysdefs, it should be...

http://www.tonymacx86.com/graphics/48498-graphics-benchmark-programs.html Test with Unigene 3.0 and Luxmark. Then report back with your results. Are you using native drivers or have you installed the nvidia ones? How about CUDA? While it dosent pertain to WoW still something you should...

Thanks Rehab Man! Appreciate it mate.

When I type ~/Downlaods/MSRDumper/MSRDumper.kext I get: -bash: Users/admin/Downloads/MSRDumper/MSRDumper.kext: is a directory Then I try to run: sudo chown -R 0:0 MSRDumper.kext It asks for password and then says: chown: MSRDumper.kext: No such file or Directory What am I doing wrong?

Thank you for all the help. I think I’m almost there. One quick question about MSR dumper, very basic too. I understand how to type launch commands and get MSR dumper working but to simply navigate terminal to the folder where I have the file downloaded what do I type? Example: file...

This is my scenario. GA Z77 -UD5H i7 3770k (stock for now) GTX 580 1.5gb 8gb Corrsair Vertex 4 / Crucial M4 SSD’s Custom EK watercooling loop 10.8.2 running MacPro 3,1 Sorry if a lot of these questions seem basic. I’m fairly new at all this and trying to understand the...

Thanks, I've had a read through that thread but unfortunately it leaves me with more questions then when I started. While the thread is great I feel like there is some implied steps that a new guy like myself dosent know. Time for more research.

Can someone please help clarify this for me..... There is a difference between "Speed Step" working and "CPU throttle back" in regards to native Ivy Bridge/Z77 support. Yes ML 10.8.x natively supports Ivy bridge CPU power management (CPU Throttling), example, 1.6ghz under minimal load and then...

Thanks for the recommendations. I'll see what some other options are. I do feel its just a miss-read by FakeSMC sensors. Not to be rude either but the OCZ Vertex 4/ Samsung 840/ Scan Disk are three of the fastest SSD's available with excellent reliability... While OCZ's drives in the past had...

Any luck with this error? I have a Vertex 4 as well report they same red negative values.

http://www.tonymacx86.com/mountain-lion-desktop-support/86807-ml-native-ivy-bridge-cpu-gpu-power-management.html Have a read through that ..... They talk about SB with Z77 in point #3 and a little bit in the thread... Modified SSDT I believe is required for any SB over-clock too. You'll...

What system definition are you running? Z77+ SB needs to run a SB sys deffinition. Plus you need to look at power managment. DSDT and SSDT's maybe required for proper speed stepping. I wish I could help more. There is def. more work required to get SB and Z77 functioning properly. I was...

Did you do anything different to get USB 3.0 working and what revision of the board do you have 1.1 or 1.0? Thanks Mate

Have you had any luck with the VL811, I also have rev 1.1 with that same chip. I followed Slugnet's golden build and for some reason installing his AHCI_3rdParty_SATA.kext made my USB 3.0 ports work. I'm lost for any logical reason why it may have worked but I'm getting USB 3.0 transfer speeds...

Can you clarify something for me.... There is a difference between "Speed Step" working and "CPU throttle back" in regards to native Ivy Bridge/Z77 support. Yes ML 10.8.x natively supports Ivy bridge CPU power management (CPU Throttling), example, 1.6ghz under minimal load and then jumps to...

From what i've read, recording into a daw is where you will experience issues. Playback for the most part seems to work. It's absurd to think you even need a driver package to run an audio device in OSX anyway. I've held off on doing anything with my FW410 due to lack of support. Many people...

After I replaced the the 3rd party AHCI kext for USB 3.0 support my shutdown process hasn't felt as smooth. OSX shuts down right away but the acutal computer/fans/mobo are still powered on... this could be for as short as 3 seconds to as long as 10 seconds. Before I updated the kext as soon as...