Search results

point one will break/brick your mac unless you have a copy of the original EFI, not just a copy of another mac. anyway, why would you want to boot a real mac with clover? You can look at it as if Clover is used to emulate mac hardware on regular pc hardware, mostly the hardware is there but...

Hi, I managed to get all ports working again, it appears I mixed up some iterations of my SSDT-UIA, the version I posted earlier had two additional entries (for USB-C), my local stored versions didn't. I'm not getting an exported Kext working, just using the UIA.kext and an SSDT, works fine...

Thats the problem, with Hackintool there is no device reported when i connect it, I guess I have to boot without SSDT and go from there again, could it be a port limit thing?

I had to add the -disablegfxfirmware bootarg, ( I reverted partially back to my old EFI for USB sake). It is booting successfull. I added the part for DP from @Amateur85. now have only an issue with USB-C left. I think it is anoying that there are different versions (even bios size) S200...

I didn’t have any luck with the AWAC thing, i took the device apart and programmed a backup of my bios with a ch341 programmer (i normally use for imac password recovery). I also noticed that the bios of the new device was 16Mbit and mine was 8, i just went for it and it booted fine with my...

I missed the AWAC part, what is it? did e-global change something in the bios that breaks something?

i finally found a moment to test your new EFI in my own S200, I tried it with only updating the serials, it boots and DP works, but USB3 was not working, I than tried to add my own SSDT (like posted previously) and disabled your kext, but without luck, now I inserted the kext exported from...

Thanx that worked well only didnt set the ROM number (dont know the eth mac). We made an intaller and copied the EFI to the usb drive. We cant get the installer booted. Is this because of the ROM being empty? we installed a samsung 970 evo plus 521gb and updated the firmware and 2x16gb ddr

I'm starting a new build on another S200 machine, @Amateur85, can you explain how to fill the serials (where to get them) last time I copied them from my CLOVER install but don't have that in this case MLB => simpleMLB.sh ? ROM => eth mac or wifi mac without ":" systemSerialNumber => ...

The aml is correct, the port works in both usb2 and usb3 mode in my setup

After some more fiddling (and looking to the VORKs V8 kext with hackintool i found that the USBc is located at HS06, SS06 and SS07 (dunno why there are two SS ports). it works now, in both usb2.0 and usb3.0 mode (not tried usb-c video though)

Thanks you so much! I tried to figure it out with rehabs's guide but don't get it. i'm a professional embedded software engineer so not a complete n00b, but still ;-) in my previous configs only USB2 devices where recognized, since I only have USB3 usb sticks and none of the USB3 ports...

Hi, thanks for the elaborate response! It was the SMbios name after all, changed it to imac14,1 to match the serials and it boots! - I checked my L/E folder and moved a few FakeSMC related kext to the CLOVER/kext folder. but couldn't find any duplicates. - I did have to sign in to my Icloud...

just checked with CSM disabled, Getting a bit further i guess but still not able to boot mojave I checked the DSDT with MaciASL, and was able to find the PNP090C device. here is my DSDT, I use the exact OC you posted but with added serials (from hackintool) under platforminfo/generic, the...

thanks for the info I forgot indeed the CSM, i'll give it another try

i’m sticking with mojave for this machine but want change to OC for future compatibility How can i tell if my embedded controller is under H_EC? I’m a bit of a noob wrt hackintosh bootloaders.

hi, i checked out your config but im unable to boot, any clues? i filled out the system serial etc (dunno if correct tbh) I’ve got the i5 s200

For people with small formfactor pc’s, have a look at this device ngff to Apple wifi wit flexcable, works like a charm wit my S200 (ngff e-key is below the SSD and only a 2230 card (like this one) fits because of a heatsink that gets in the way) https://s.click.aliexpress.com/e/nP3P9gKy

I also can't get USB3.0 to work on any ports (during bootup it is detected but macOs does not like it. USB2.0 works though (keyboard, mice, card reader,...)

Just installed a neat ngff adapter to Apple wifi with flex extension I need to mount it better but it works https://s.click.aliexpress.com/e/nP3P9gKy note remove all wifi related custom kext (Bcrmram..., airportbcmfixup,...)