Search results

Thanks @suren6791

@suren6791 Since you moved to the z790 ProArt, how are you liking it? Care to share your EFI for that build? Any issues with NIC or USB ports?

Very cool and thanks for sharing that! I'm still tweaking the last few things, but this definitely helps on the USB audio, I thought I was going crazy.

Any chance you want to share your final EFI, as I've been struggling with some of the exact same stuff with idle and 11900k weird stuff on full load? Much appreciated!

==== SUMMARY ==== Upload capacity: 35.492 Mbps Download capacity: 881.205 Mbps Upload flows: 12 Download flows: 12 Responsiveness: High (1955 RPM) Base RTT: 14 Start: 4/11/22, 2:09:57 PM End...

oh, good to know. I thought I was going crazy thinking it was possibly in MacOS, and I missed something. Thanks!

Just curious on your process for getting the commander to show up in iCue for MacOS. I'm able to block the UPS via the kext, and I can control fans though liquidctl and rgb through OpenRGB, but it would just be even better to use the native app as you have. Any help or tips on what has worked or...

Yes, you will need to also make sure to add the kext to your config.plist for OpenCore.

@cocoman Kext is here under releases

Do you have a full backup? Also I find that if you have a spare drive with enough space, you could clone it using CCC or SuperDuper, and then make sure to move over the EFI folder as well. Then you can do the update to 11.4 via USB drive and test it out. I would also prob before doing the...

That is rather odd, I'm seeing very similar results right now here. For now, I'm just turning off monitors on the monitor, or disable sleep and running screensaver, which is working as a workaround. Need to dig a bit more soon, I'll let you know if I discover anything else.

Good to know. If I remove the display port and plug back in, its back up. So it seems like its not holding onto the signal. Weird.

Have you had any issued with waking from either sleep/display off? I'm guessing its the USB Type-C causing the issue, but I'm only using Display port for now. Just curious if you had any issues like that.

Now to build a flash drive...

Looking at 655 closely as when trying to spoof those frame buffers, I noticed almost no lag even though I didn't have full acceleration. I had to swap for another board with Amazon, as this hero XIII was being a little weird with one of the m.2 slots, but I should have a replacement in a few...

Let me know if you get a Geekbench 5 for the 11900k/Hero XII. I had to get some IRL work done, but I'll be back on it over the weekend for sure, and I'll update you on any prog. I'm also going to picking up a few more 11900k so I can properly bin them and then sell the other ones. So far I have...

Have you tried formatting and building that flash drive? I've seen the same flash drive go bad after an install. It's possible and a pretty easy fix. Also just double checking that XHCI Handoff is enabled in your BIOS settings and also that Fast Boot is not enabled in your BIOS settings.

Sounds good. Can you run a Geekbench 5 before you put the 560 in, and then again after? No OC. Trying to get an idea what the baseline is for you, as my baseline seems a little low compared to others.

as far as iGPU, looking into 655 pretty hard, as I think that might be slightly closer to the 750 in the 11900k. Worth a shot. Trial and error for different frame buffers, so far nothing with full acceleration, but I've found a few that seem close and aren't as choppy. I'll work on that tomorrow...

Yes, completely stable now for both of them. Working on CPU a bit for Geekbench scores. Seem to be quite low compared to Windows. CPU friend is installed. Have you benched at all for the 11900k yet?