None. Both load with one of two display squeezed, but both work good after I put OS to sleep and wake.
So now I'm pretty happy with the set up. Just need to sleep-wake after reboot :)
Thank you for your help!
Disabled 0x6 patch. No visible changes.
Swapped monitors - now Smaller screen ( which is now on HDMI ) is squeezed. Good after sleep->wake.
Irrelevant: Interestingly. OSX still thinks it's a "primary" display - shows login options on it, like it did before swapping...
ASUS Z97M-PLUS
i5-4690
No external Graphics.
OS 10.11.6
I have been using one display (Samsung 245t 1920x1200) with no issues on 4600, but now trying to connect 2nd display (Samsung 173p 1280x1024), and having issues.
The bigger screen ( 1920x1200 ) looks like this on first boot when both...
Thank You! That helped. Still getting Device needs more power, occasionally when connecting new devices, but TWO USB3 HDDs seem to be ok, and not loosing anyting after sleep.
To conclude:
Thank you for review. I've made that archive after getting back from sleep.
To clarify: Here is how I'm trying to enable power injection:
1. Launch clover Configurator and mount EFI partition, then select my plist
2. Check "inject" checkbox on Devices->USB
3. Save plist and restart
Now attached...
Set config.plist/Devices/USB/Inject=true, getting same behavior. Interestingly, without that patch, I was loosing two of 6 usb2 ports on reboot most of the times. Loosing 4 now, but that might just be a coincidence.
p.s.
Also tried "Smart Auto"/"Auto"/"Enabled" in BIOS along with USBInject=true...
oops, sorry, I read post #1 10^6 times, but was dumb enough to miss "Problem Reporting"
Here is recent update:
I've added FakePCIID_XHCIMux.kext and that fixed "needs more power" issue. So I can plug/unplug devices into any ports and see them working.
Hovever, now I'm loosing USB2 devices on...
ASUS Z97M-PLUS (Internal graphics)
With XOSI patch, USBInjectAll.kext and FakePCIID.kext and Without(!) FakePCIID_XHCIMux.kext and Without(!) port number increase Patch I'm getting all pv my available ports recognized using this boot flag:
uia_exclude=HS01;HS02;HS11;HS12;SSP1;SSP2 ( excluding...
I'm a little late to this thread, but somehow my ports worked fine until I updated Clover.
My board is same: ASUS Z97M-Plus ( Internal Graphics )
With USBInjectAll.kext and FakePCIID.kext and Without(!) FakePCIID_XHCIMux.kext and port number increase Patch I'm getting all ports recognized...
Tried that. Disk Utility says it can not be repaired and I should backup as much data as I can and reformat the drive.
Once formatted, it looks perfect in DU.
now looking for a good drive test utility, that would do full "surface" tests. Only windows options found so far...
I have installed INTEL 510 series SSD and everything works fantastically, except after few hours it fails with "invalid key length" message. (see screeshot)
Interestingly:
first few reboots are just fine
just before the "fatal" reboot everything works smoothly
so the problem only appears on...
Very nice guide.
Interestingly, in current Yosemite build from App Store, "Restore from Time Machine" option is missing. So full restore from UniBeast flash drive is not possible. (not sure if it is there for normal macs)
Now trying to restore Yosemite Backup using Mavericks UniBeast.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.