New PC, motherboard B360M Aoros Gaming 3, chip core i3 8100, NVDIA GTX 1050

I have a computer motherboard Aoros B360M Gaming 3, chip corei 3 8100, vga: NVIDIA GTX 1050
I installed Mac version 10.13.4 is created by config.plist as attachments below.
But I get the error "Still waiting for root device", I have to find a fix but not successful. People can help me edit files compatible config.plist for it?
Hope everyone help please!
my PC configuration:Here

fuzitsu said:

I have a computer motherboard Aoros B360M Gaming 3, chip corei 3 8100, vga: NVIDIA GTX 1050
I installed Mac version 10.13.4 is created by config.plist as attachments below.
But I get the error "Still waiting for root device", I have to find a fix but not successful. People can help me edit files compatible config.plist for it?
Hope everyone help please!
my PC configuration:Here

Click to expand...

Will it be USB problem? It is known that B360 board need a new kext for the usb to work.
Please refer to this page. #86

raymondau said:

Will it be USB problem? It is known that B360 board need a new kext for the usb to work.
Please refer to this page. #86

Click to expand...

But I have this problem when running the install!

fuzitsu said:

But I have this problem when running the install!

Click to expand...

@raymondau is correct :

raymondau said:

Will it be USB problem? It is known that B360 board need a new kext for the usb to work.
Please refer to this page. #86

Click to expand...

"Still waiting for root device".
When booting from USB means that there is a problem accessing your USB flash drive.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.
Ensure that Fast Boot is not enabled in your BIOS settings.
The problem may also occur when your USB controllers are unsupported, if this is the case you should add the appropriate kext to /EFI/CLOVER/kexts/Other.

raymondau said:

Will it be USB problem? It is known that B360 board need a new kext for the usb to work.
Please refer to this page. #86

Click to expand...

I've fix the error on and complete the install MacOS, but I see the problem is that it does not get any graphics card at all including graphics of intel? i wish you to help!

fuzitsu said:

I've fix the error on and complete the install MacOS, but I see the problem is that it does not get any graphics card at all including graphics of intel? i wish you to help!

Click to expand...

I don't quite understand, if you don't have any graphics, how do you know the installation is complete. You mean you get a black screen? Have you properly install the Nvidia web driver? My built is Asus B36M with GTX 760 graphics card and it works smoothly.

raymondau said:

I don't quite understand, if you don't have any graphics, how do you know the installation is complete. You mean you get a black screen? Have you properly install the Nvidia web driver? My built is Asus B36M with GTX 760 graphics card and it works smoothly.

Click to expand...

I installed the web driver, full graphic card but received just that: unknown 250 MB

raymondau said:

I don't quite understand, if you don't have any graphics, how do you know the installation is complete. You mean you get a black screen? Have you properly install the Nvidia web driver? My built is Asus B36M with GTX 760 graphics card and it works smoothly.

Click to expand...

network ports your motherboard is what? I'm having problems not receive network port!

Mine is Intel® I219V. someone suggest IntelMausiEthernet 2.40 kext to make it work. What is yours?

Your gigabyte board should use Intel® GbE。Have you tried AppleIGB kext in Multibeast.