PowerMac G5 mods Erilov`s

I once saw a mods in the case of PowerMac G5 and wanted to do something his. By that time I already had a fully working hackintosh. When I was able to buy a building for the local market, I immediately transgressed to work.

Parts
- Gigabyte GA-H77-DS3H
- Intel Core i3-3245 3.4Ghz
- 2x4Gb AMD Ram 1600Mhz
- AMD Radeon 7750 1Gb
- Intel Graphics HD 4000 (AirPlay only)
- SSD Intel 530 series 120GB
- HDD Seagate 1Tb
- Atheros AR8151 v2.0 Gigabit Ethernet
- Intel PRO/1000 CT
- Broadcom BCM94360CD
- Sound Blaster Play! 2
- AppleALC 888B


People love pictures, so I will spare the dialog. Feel free to ask questions, leave comments, etc.
I apologize for the mistakes Russian is not very convenient to write in English.


Computer got me in perfect condition. All components were working except the video card.



Here at last I brought the body home and began to disassemble.


After dismantling break off all stem from the native motherboard.

Start rework the PSU.
Original PSU


All the interior of throwing, take the normal power supply of the pc and try on his. The original cooler from PSU I decided to leave, but they are very noisy in the near future will change to a more quiet. Native Connector 220V solder in place of the old, I cut off the button and connected directly to the. Cooler solder parallel to the cooler in the power supply.



HDD power cable I decided to leave, for it snapped and resolder 6-pin connector to your power supply unit.


Now when the power supply is assembled, we test the entire system


Front Panel.

Installing the motherboard.
Glue native legs on epoxy resin and pressed by something heavy.


Finally I got the package with the engraver and I can continue)

At the top "shelf" Scrollsaw notch motherboard


Runners for hdd I pushed forward, because the motherboard standing behind. And I had to change the attachment for them: the handle "A" rested against the edge of the body and I shortened it a bit, also sharpened the thread on the bolt.


Now I gather all together and look at the result...

All kexts to boot the system, the bottom of the config


Good luck in the mods and a Happy New Year

carried by Russia!

Nice mod man!

eti pediki trut russkie kommenti! dumayu postavit rodnie kuleri na napryazhenie 7V, budet normanlo

Very nice!

I really appreciate that you have kept the cutting to a minimum for the motherboard I/O plate in the back. Too bad they are a bit to the back compared to the original.

What PSU did you use to fit in the original PSU case? Was this a lot of trouble?