Contribute
Register

MacOS Sierra installer dosent boot on Sony Vaio VPCEG23EL

Status
Not open for further replies.

Attachments

  • errormac.jpg
    errormac.jpg
    355.9 KB · Views: 131
RehabMan said:
Wrong guide. Read post #2.
Click to expand...
I dont know what to do on that guide, it is just a FAQ
I found this but i dont know if thats the problem

Sandy Bridge/HD3000/6-series chipset/low resolution

If your display is 1366x768, Chimera should be able to boot with working a working HD3000 graphics without any special graphics flags (just IGPEnabler=Yes, which is default on the Unibeast created USB). If your display is higher resolution (1600x900 or 1920x1080), then it is likely your laptop uses a dual-link display. In this case, you must pre-patch DSDT in order to inject AAPL,DualLink.

So for, Chimera, no special flags are generally required for HD3000 graphics.

With Chameleon, you will likely need: GraphicsEnabler=Yes

If you still have trouble, you should pre-patch DSDT...

HD3000 Low Resolution: https://github.com/RehabMan/Laptop-DSDT-Patch
Apply:
"HD3000 Low Resolution"
 

Attachments

  • Archive.zip
    2 MB · Views: 75
Now using your config.plist for HD 3000 and Null CPU kext but error
qJtIwWe.jpg
 

Attachments

  • Archive.zip
    1.7 MB · Views: 73
AlexRubio said:
Now using your config.plist for HD 3000 and Null CPU kext but error
qJtIwWe.jpg
Click to expand...

Your config.plist is corrupt, therefore ignored by Clover. This is the content:
Code: 
404: Not Found

Follow the guide carefully.
 
RehabMan said:
Your config.plist is corrupt, therefore ignored by Clover. This is the content:
Code: 
404: Not Found

Follow the guide carefully.
Click to expand...
Oh yeah, that config.plist was wrong but now I put yours and same error
nZ40QsO.jpg
 

Attachments

  • Archive.zip
    1.7 MB · Views: 76
AlexRubio said:
Oh yeah, that config.plist was wrong but now I put yours and same error
nZ40QsO.jpg
Click to expand...

Not the same error. It shows you're using the wrong VoodooPS2Controller.kext (current version is 1.8.24).

Read the guide carefully.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top