- Joined
- Oct 4, 2012
- Messages
- 67
- Motherboard
- Gigabyte Z77N no working Wifi
- CPU
- i5-3570K
- Graphics
- Intel HD 4000
- Mac
- Classic Mac
- Mobile Phone
Hi again...
Finally after a few times of reinstalling (SuperDuper backup actually) I got it all (99%) working.
* Motherboard GA-Z77N-Wifi BIOS version F2 ( Toleda)
( only thing disabled in BIOS is 'Internal CPU PLL Overvoltage' but didn't check install if it's enabled)
* i53570K not over-clocked
* 8 Gb Corsair Vengeance 1600/C7 memory
* onboard HD Graphics 4000
* Kingston HyperX 120 GB SSD
* 2 x 500 GB WDC's in RAID (done in OS X)
8< --------- (this part I stole from my other guide)
What did I use and how I used it :
- USB stick with Mountain Lion 10.8.2 (official from App Store)
(there are a lot of install guides with UniBeast - Mountain Lion 1.7.0 for that so I'm not gonna guide that inhere)
- Installed 10.8.2 on a empty SSD
- I tried a few 100 times with all kinds of DSDT's ... didn't work for me this time.
- Using MultiBeast - Mountain Lion 5.2.1 with following configuration :
8> --------------
Booted twice (don't ask me why, I just read it somewhere more then one time, so did it too)
Once back I tested sleep/wake-up ... worked (for some reason if I use DSDT and DSDT audio I loose the wake-up function, it just hangs then ... and need a hard reboot.
Then i use Chameleon Wizard to change theme, org.chameleon.Boot.plist :
I also marked in Miscellaneous 'darkwake=0' and after saving I changed
in the org.chameleon.Boot.plist with text editor 'darkwake=10' ..
I read somewhere that now auto sleep works without the program 'please sleep' and it did.
I also used Chameleon Wizard to get iMessage working with the guide from sunviva2 I found
Step by Step Fix for iMessage - Requires Latest Chameleon
So at this moment I've got working :
- Audio ALC882
with airplay too only no audio on HDMI cause then I need DSDT and that will break the wake-up
- √ Trim for the SSD (don't forget turn off 'Put hard disks to sleep when possible' when use SSD)
. but sleep can be on if add a HDD to
- √ USB 3.0
- √ 2 x Realtek GbE LAN
- √ no problems with video HD 4000
- √ Power button sleep, keyboard sleep (alt-cmd-eject), sleep from menu and auto sleep
- √ wake-up in just few seconds from keyboard, power-button and usb mouse (nothing from Bluetooth)
(and I can't turn it on either in Bluetooth settings)
- √ onboard Bluetooth working, only there's a delay at start before it sees Bluetooth devices for about 20 seconds ... that's very annoying but at least it works out of the box
- Xonboard wifi, there are some possibilities to get it working, I've read in some treads here, but I don't need it
So far so good
happy hacking and greetingZzz
Finally after a few times of reinstalling (SuperDuper backup actually) I got it all (99%) working.
* Motherboard GA-Z77N-Wifi BIOS version F2 ( Toleda)
( only thing disabled in BIOS is 'Internal CPU PLL Overvoltage' but didn't check install if it's enabled)
* i53570K not over-clocked
* 8 Gb Corsair Vengeance 1600/C7 memory
* onboard HD Graphics 4000
* Kingston HyperX 120 GB SSD
* 2 x 500 GB WDC's in RAID (done in OS X)
8< --------- (this part I stole from my other guide)
What did I use and how I used it :
- USB stick with Mountain Lion 10.8.2 (official from App Store)
(there are a lot of install guides with UniBeast - Mountain Lion 1.7.0 for that so I'm not gonna guide that inhere)
- Installed 10.8.2 on a empty SSD
- I tried a few 100 times with all kinds of DSDT's ... didn't work for me this time.
- Using MultiBeast - Mountain Lion 5.2.1 with following configuration :
8> --------------
Booted twice (don't ask me why, I just read it somewhere more then one time, so did it too)
Once back I tested sleep/wake-up ... worked (for some reason if I use DSDT and DSDT audio I loose the wake-up function, it just hangs then ... and need a hard reboot.
Then i use Chameleon Wizard to change theme, org.chameleon.Boot.plist :
I also marked in Miscellaneous 'darkwake=0' and after saving I changed
in the org.chameleon.Boot.plist with text editor 'darkwake=10' ..
I read somewhere that now auto sleep works without the program 'please sleep' and it did.
I also used Chameleon Wizard to get iMessage working with the guide from sunviva2 I found
Step by Step Fix for iMessage - Requires Latest Chameleon
So at this moment I've got working :
- Audio ALC882
with airplay too only no audio on HDMI cause then I need DSDT and that will break the wake-up
- √ Trim for the SSD (don't forget turn off 'Put hard disks to sleep when possible' when use SSD)
. but sleep can be on if add a HDD to
- √ USB 3.0
- √ 2 x Realtek GbE LAN
- √ no problems with video HD 4000
- √ Power button sleep, keyboard sleep (alt-cmd-eject), sleep from menu and auto sleep
- √ wake-up in just few seconds from keyboard, power-button and usb mouse (nothing from Bluetooth)
(and I can't turn it on either in Bluetooth settings)
- √ onboard Bluetooth working, only there's a delay at start before it sees Bluetooth devices for about 20 seconds ... that's very annoying but at least it works out of the box
- Xonboard wifi, there are some possibilities to get it working, I've read in some treads here, but I don't need it
So far so good
happy hacking and greetingZzz