Recent content by zarksus

hello everyone, I have an ASUS notebook F55V with ASUS motherboard X55VD (original firmware). The laptop is equipped with an Nvidia GeForce 610m (1GB) + Intel HD4000 my question is: 1) since OSX does not handle the Optimus technology, what should I use as the primary graphics card? 2) I...

How to patch DSDT for working battery status Hi Rehabman, I followed your guide. I had two 16-bit values ​​which I have divided into two 8-bit and so far so good. Now I am faced with a value of 256 bits, how should I act? OperationRegion (SMBX, EmbeddedControl, 0x18, 0x28) Field...

the noise you hear when the PC is to mean that the microphone is placed too close to the computer speakers (you have to adjust the configuration of VoodooHDA) ok, start the computer from the flash drive and select the mac partition you have installed the hard disk (if you start the partition...

The PC seems acceptable (+ Intel HD4000 should be stable and efficient). Unless you want to lose Windows 8 attempts to install on another hard drive. Use the guide: http://www.tonymacx86.com/61-unibeast-install-os-x-mountain-lion-any-supported-intel-based-pc.html

I solved the problem of multi-touch and ethernet, both now work. I will insert the kext in the guide that I'm doing. I'm trying to run the suspension, the last thing that remains to be solved. Does anyone have any idea?

- recently news - I have build a DSDT for my PC (Vanilla running perfectly) after, I modified the DSDT patches by adding: USB / UHCI and DTGP as described in this txt file (suitable to my mobo) but does not work. I just copied and pasted the code that is written in the _DSM the DSDT. I do...

ok, this is my "Wake Reason": May 5 18:21:00 Leo kernel[0]: Wake reason = EHC1 EHC2 May 5 18:21:00 Leo kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by issuing a remote wakeup (2) May 5 18:21:41 Leo kernel[0]: Wake reason = EHC1 EHC2 May 5 18:21:41...

after using the easybeast installation and VoodooHDA latest driver restart the PC without the usb key. If the system starts properly but there are graphics problems (low resolution) look at this thread: http://www.osx86.net/video-graphics/17587-mountain-lion-hd5650-won-t-work.html

you have completed the installation with Multibeast? after installing ML need to download and run Multibeast selecting options EasyBeast Installation (unless you have a DSDT for your motherboard) and the audio and video options (not included in EasyBeast) correct for your hardware devices. for...

I read that to enable the suspension should I patch my SSDT. I extracted DSDT and SSDT by linux but do not know how to patch. can someone help me? I attach the file

Hello PIETROMETER thanks for your response. Now I remember best: ethernet does not work on my ML, I forgot to mark it in the list (I hasten to add :P) to enable multitouch on ML you must install the kext I attached. On my ML 10.8.2 running perfectly :) A few days ago my hard drive is...

no one can help me?

hello all I am going to ask for help from you to help me fix some troubles arose on my Packard-Bell TS11HR This machine is incredibly compatible with OS X 10.8 I installed from USB Mountain Lion with UniBeast and after a week of fix the system is almost stable :) I only have a few small...

[SOLVED] HP Pegatron IPMTB-TK (Truckee) I solved the last problem, I would install the kext OpenHaltRestart and now it shutdown ;) MiniITX ok, as soon as I have some time I will take to write everything that I did in a post. Thanks for everything :D:clap:

after a morning I was finally able to update to version 10.8.2, the drivers are installed CUDA and Quadro - Geforce. The system is stable and works much better than before. Thank you for your support MiniITX :thumbup: I just have to try to solve the problem because it will stay off of the...