Contribute
Register

Recent content by yabusa

  1. yabusa

    Problem Shutting Down and waking from sleep

    I tried PluginType, still freezes on shut down. Also bluetooth doesn't show on macOS, but works on Windows 10
  2. yabusa

    Problem Shutting Down and waking from sleep

    I'll give that a try now. I had a question though. I saw a post about CPU power management. Does that mean if you want to overclock? Or does that mean to let your CPU run it's Turbo speed? Or neither? lol
  3. yabusa

    Problem Shutting Down and waking from sleep

    Hi there, I had a perfectly working Hackintosh with my GIGABYTE z370 HD3P motherboard. I switched to ASUS Prime A for thunderbolt 3 compatibility, and since then I haven't been able to shut down without holding down the power button. Attached is my config.plist. I tried darkwake=10, but still...
  4. yabusa

    Solved > Boot just fine with one GPU, dual GPU gives error and doesn't boot

    I'll call it solved by black magic
  5. yabusa

    MacOS won't shut down safely

    I keep having an issue after switching from a GIGABYTE z370 HD3P to an ASUS z390 Prime A. Booting is no problem, but when I try to shut down or restart, the screen always freezes. In windows it shuts down normally. I tried checking off "Shutdown Fix" in clover, but not change. Does anyone know...
  6. yabusa

    Solved > Boot just fine with one GPU, dual GPU gives error and doesn't boot

    Strangest thing pastrychef. I set my BIOS back to how it was prior to the issue started, and it's booting no problem. I had tried the aptiofix3drv.efi, didn't boot, reset BIOS, then booted. Do you think the .efi needed at least one attempt to engage? Or maybe the BIOS reset fixed the second GPU...
  7. yabusa

    Solved > Boot just fine with one GPU, dual GPU gives error and doesn't boot

    Not the aptiofix no. Weirdly, I reset my bios, and i'm able to boot. I will readjust bios again to try to figure out what the problem was and post the solution
  8. yabusa

    Solved > Boot just fine with one GPU, dual GPU gives error and doesn't boot

    Using an RX580 and a WX7100. When the WX1700 is disconnected from the motherboard I can boot, but crashes on shutdown. When I attached the other GPU it fails to boot with this verbose Anyone have any ideas? Or where I could look?
  9. yabusa

    Boot freezes

    Hi there. I had a gigabyte motherboard working perfectly, but needed thunderbolt 3, so upgraded to a z390 Asus prime a. Set optimized settings, then followed this guide and it won’t boot. When I do optimized settings alone, it boots, but always freezes on shut down. Image of verbose attached
  10. yabusa

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    Thanks for your time Feartech. Otherwise everything is looking good right?
  11. yabusa

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    I updated to 10.14.4 after backing up, and the usb 3.0 doesn't work again. From what I read, if the SSDT was successful that should not be the case. Can someone please double check my work
  12. yabusa

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    I followed your instructions, worked perfectly, I updated to 10.14.4 after backing up, and the usb 3.0 doesn't work again. From what I read, if the SSDT was successful that should not be the case, right?
  13. yabusa

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    Hi Sniki, please forgive me. I hadn't taken my prescribed CBD oil in a while and without it I can't focus or read well. I followed the steps, and it was very well written. Attached are the files. I think a video of how to set up SSDT would be much beneficial to the community. Not everyone can...
  14. yabusa

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    The "RehabMan" Folder was empty
Top