Recent content by sonnywaters

Hello everyone! Does anyone have an updated version of this config? I have tried to boot this using BS Beta installer and it won't get past the [EB|#LOG:EXITBS:START] line.

Yes, using latest version. My boot time is less than 30 sec... usually 15ish

Do any of you have a problem with your laptop powering off after you unplug it from AC power? The battery is charged, show 100% but within about 5 sec, it powers off after unplugging. This is on a T440 using this EFI config. I can boot up from the battery and it lasts "normally". Also, any...

I use the T440s OC config from this thread and all works, except the second battery. I guess I should say that is all that I have found that doesn't work. If there is something, I have not found it yet.

Another T440 user here.... the T440S EFI works very well so far, but I'm definitely looking forward to having the second battery working. Many thanks for your work on this!

The reason I mention getting the ports to behave is that sometimes my keyboard and other devices will not work until I unplug and replug them in. Usually, this is only on the HSxx ports, but that's mainly all that I use, unless it's a 3.0 thumb or portable HDD. They are usually plugged in when...

Greetings all! I am needing help with getting all my USB ports to behave properly. After reading through some threads, specifically this one: https://www.tonymacx86.com/threads/using-fakepciid_xhcimux-kext-on-z97-system-with-mojave.264453/, where JayMonkey and Rehabman talk about the embedded...

I had to update to 10.15.2 before my 5700 would even be recognized. Once the update applied, then it was smooth sailing. However, are you still using the iGPU for anything? Like quick sync encoding? I like utilizing all aspects of the hardware, but if the 5700 is going to out perform it doing...

After much research, I found that the classic answer of "it depends" applies here. If it was going to use the chip's GPU, then a 17,1 (6X00 series) or the 18,1 (7X00 series) would have worked just fine. However, if you are going to use a dGPU, then it complicates things. 6x00 series would...

I currently have a Z97 i7 build that is running very well thanks to the community. Cheers all around!! Now, I want to build a newer version of it using a Z270 MB (I found one cheap). But, since this a budget build, I am wanting to use an i5-6500/6600. My question is this, what SMBIOS profile...

I am no expert, but according to what I have read, if you have achieved "full graphic acceleration", then multi-display should work. (some work even if you don't get that far) I would suggest getting Hackintool and see what info about the ports you can gather.

I think you have answered your own question there. The adapter works in windows, so physically it should work in this case. As long as nothing with your setup has changed (like BIOS settings), then it should work.