Recent content by nenao

Thanks for your guide !!!! Everything ok as per guide. how do i set the trackpad preferences? Two finger tap as secondary click not working. Thanks!

But yours is RX 580 Pulse 8GB. Mine is a Gigabyte RX 580 Gaming 8GB. Maybe it is the problem for me....

Ok pastrychef, ioregistry checked and UHD630 is there, ok! Both monitors plugged in RX580. i`m using yours EFI and with my serial, board serial and UUID, but with your fakesmc no way i but one screen with apple sign, the load bar and the moving cursor and the other screen with yellow flicks...

Hey pastrychef , first thanks for your work! I have the same build as yours excepts video card, i`m using RX 580 from gigabyte. I`m having problem to have RX580 and UHD630 working . I can only use RX580, no UHD in system report, and with last FAKESMC not even my RX580 works (two monitors via...

I`m fixed it!!! Able to boot with two dp monitors with -raddvi. Everything ok now. Thanks.

I`m also having problems with mojave and Gigabyte Aorus RX 580 8Gb with dual monitors using display port for both booting to only wallpaper, mouse cursor moving and yellow glitches. Booting with only one DP monitor everything is ok. Already tried all dp ports combinations with two monitor and...

i`m having problems with my gigabyte RX 580 8Gb, 10.13.3 , everything working ok with LILU and Whatevergreen, two 4k DP monitors, but having freezes with moving cursor from times to times, already tried using radeondeinit alone , but the same happens, what can i try to fix?

Why you patch IONVMeFamily in your config?

Ok I have IntelGFX - hds-gfx - onboard-1 in devives and there is com.apple.driver.AppleIntelKBLGraphicsFramebuffer 0x591b0000, 0105 instead of 0306, HDMI in KextstoPatch. HDMI video works ok with lid open or closed , but no audio. Here is my CLOVER folder.

I got everything working with the same laptop but with core I7, less the card reader and de HDMI audio. How did you got yours HDMI audio working? I already follow toleda guide but nothing seems to help. Thanks.

i agree with you but Stork's guide to install nvidia driver tell to enable SIP.

As STORK guide says: ...... :ch: Mount the HS drive's EFI partition and change the SIP setting (CsrActiveConfig) from MultiBeast's default 0x3 to 0x0 which turns on SIP and save; :ch: Make sure that the Security and Privacy System Preference pane General tab setting for "Allow apps downloaded...

but as guided i should enable SIP (0x0) to install nvidia drivers, am i doing something worng?

I can't boot with SIP enable (0x0), got osxaptiofixdrv error. Any help on this?

Anyone help?