You don't need to define the connectors at all as far as I can tell.
It's something we're testing over on Zearp's GitHub as part of trying to get 4k working, but so far it hasn't really made a difference (see this thread, we've got a ton of info/tests going on).
If you're curious, here's a...
How do you manually enter a max-pixel-clock value? I found that the default 675 MHz limit can be changed with the `max-pixel-clock-frequency` property in `IGPU`, which overrides the new max pixel clock limit (in hertz) (link: https://github.com/acidanthera/WhateverGreen/pull/80/files). But the...
Interestingly, I discovered that the enable-hdmi20 also functions to raise the pixel clock limit to 675! The most obvious thing to do was to swap that 1:1 with the enable-max-pixel-clock-override property (or alternatively, the -igfxmpc boot-arg which also does the same thing), but neither of...
I've made some progress investigating 4k/60 via Haswell HD4600 IGPU on the Dell OptiPlex (SFF 7020) and posting my findings in hopes that it might give some leads to other more knowledgeable members of the community.
The main issue (as I understand it) moving from the working 4k setup on...
No, on Catalina - I tried Big Sur and found 4k didn't work at all. As far as I can tell it looks like WhateverGreen's (WEG) enable-hdmi20 option is not working (known bug) with Big Sur. I’m not sure if it’s this value specifically, or how the properties are applied overall but I'm waiting for an...
Interesting, after some discussion it looks like the 'scaled' options with a connected 4k display are definitely limited (shows 1920x1080 or lower scaling resolutions) vs., connecting the same monitor to a real MacBook (which shows much higher scaling resolutions available, e.g., 1440 scaling)...
@li3p I upgraded using a 7020 SFF OC system. Easy upgrade, however I found I lost 4k (60Hz is working, but max resolution is 2560x1600). In Displays in settings it now shows iMac where before it said Retina iMac... @trs96 this is using the settings that @nicksoph and I worked out previously.
Thanks, I wasn't sure if there'd been any new developments in the community but it doesn't sound like it! Agreed, wouldn't be worth the effort for basically a cosmetic case swap (i.e., would not enable additional upgrade paths). Thanks!
Out of curiosity, has anyone had any recent success case-swapping the SFF version? I know it's particularly difficult with this model (e.g., front sensors, CPU cooler, etc.) but I'm seeing some interesting hardware pop up for the MT model and was curious if anyone has any new leads/guides/tips, etc.
Unlocking the CFG
Dell hides the CFG Lock setting in the BIOS which means we have to unlock it manually. Unlocking the CFG is needed for MacOS to boot and run properly. Before we begin it's absolutely critical to be on the proper BIOS firmware.
BIOS
7020 requires the A18 BIOS
9020 requires...
Works in OpenCore with an additional step to perform an OC snapshot in Propertree by opening the config.plist in Propertree and hitting command+R, then pointing to the OC folder (this adds the new kext data to the config.plist).
Hi, I'm on OpenCore with my 7020 SFF and using dual DP monitors (27"4k + 24"1080p vertical). I've posted my summary of how to get that running smoothly over on the thread if you ever make the jump!
How to enable 4k for the HD4600 iGPU in OpenCore
Summary: The following information is a supplement the OpenCore (OC) Install Guide and provides the specific framebuffer settings for the Optiplex's Haswell processor and HD4600 iGPU. This is not required if you're not using 4k, but can be used...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.