Recent content by maleorderbride

Is native NVRAM working on your board? @CaseySJ I'm using your EFI with a few minor changes in Big Sur. Thanks! I haven't used this build in a long time and could have sworn I had native NVRAM support under Clover, but I definitely don't now. I am able to add emulated NVRAM via OC's logouthook...

CaseySJ--will you or Elias be releasing instructions or modified BIOS'es for PEI/DXE drivers being inserted into the BIOS? Apologies if this is already addressed somewhere in here.

I take it your case doesn't offer a side-mount option for a GPU? Then you could run a ribbon cable to it and not care if it was slightly more than 1 lane in thickness. Still requires re-doing the loop though. =/

Yes, for a non-Slot 2 that would be shorting the 3+5 pin on the header. I've done a fair amount of messing with dual TR on SAGE/10G and the second card is always a bit problematic, including that freezing issue you noted. I could get the card to show properly in IOreg, but it didn't help...

Did you add to boot-args: agdpmod=pikera You need that flag with Navi and Big Navi.

Correct. The SAGE/10G manual states that you should install the Thunderbolt card in Slot 2. Then Enable it in the BIOS, enable force power, and you now have a completely normal PC00.RP05 address. Can't you re-route the liquid cooling? I would recommend that. Putting a flashed TB3 card in any...

Does anyone have a Highpoint NVMe card working in Big Sur with an ASUS X299 SAGE or SAGE/10G? If so, can you please send me your EFI or let me know what you did to get it working. My 7101A-1 is only visible to the RAID manager if in Slot 2, but TB3 needs to go in Slot 2. Thank you!

I see that macworld interprets that as you do, that the MacPro will have Apple Silicon for June 2022. I guess nothing is stopping Apple from making a lower-performing MacPro. Macworld also indicates that Apple is currently designing two MacPro's right now--one with Intel and one with Apple...

Ah, yes. I should have said the first G5 not the last. Additionally, Apple is not going to be rolling out subsequent MacPro7,1's, other than a CPU refresh perhaps, so all we have is a first release there. So 2003-2009 for support for G5 from Apple. If you bought the last G5 release, then 2005-2009.

The last PPC (G5) was released in 2003. Snow Leopard dropped support in 2009. The MP7,1 was released December 2019, so the same support window would be 2025. Equally importantly, the M2 obviously can't be used in a MacPro level machine, and if they stick to only +4 cores for M3 (so 16) or +50%...

If you are using gibMacOS to download your 10.13.6 image simply make sure to press M and set the highest OS version to 10.13. Then the last choice will be 10.13.6 17G6030 so no need to anything extra when you complete the install before the web drivers. If you aren't using gibMacOS then start.

edit: nevermind. My speaker appears to be broken. No left channel even in windows.

Never-mind. It's a known issue with the i9-7920X on Mojave. Dev looking for workarounds.

Thanks for the reply @djlild7hina ! See the attached, I thought i am using Automatic and Generic already, and I am on 0.6.0. I removed my unique values of course.

I finally moved over to OC fulltime on my X299/i9-7920X, but I'm not seeing how to change the CPU-type as one did in Clover. What field do I need to edit to have Xeon W, or whatever value, rather than "Unknown" Thanks!