Recent content by macleap

CaseySJ, thank you for the confirmation and your time.

Hi CaseySJ, thank for replying, regarding the USB errors, all USB ports and devices work as expected in all tests that I performed. My main fear are the Extensions, as I mentioned all drivers are showing as Not Loaded, even those that are used, but the most concerning part is that the Apple...

Hi CaseySJ, Can you help with the above, do you have the same issues on your installation? I would also like to add that I experience the same issues on a fresh install of Ventura. Basically I am just wondering if it is something serious, or I can just ignore safely. thank you for any help.

Hi everyone, I am looking for help on two issues I noticed with Ventura 13.2.1 and previous version. 1. Under System Profiler-> Extensions almost all Extensions show as Not Loaded, Not Signed, and Not Notarized. See for example the image attached below for AMDRadeonX6000.kext. Which shows up...

Hi, yes it is better to flash the F10 and then the F13, both with the Flash button not from the bios. I see that you are ready to build a new AMD Hackintosh, if you are using Virtual Machines please note that the Virtualbox 7 is switching to the Apple Virtualization framework (no more kexts...)...

Hi, I m sorry it didn't work... One last thing!!! Are you using the built-in Antennas? if yes check if you are shorting them in some way, ie pressing them under a component... The easiest way is to remove them from the WiFi card and check the WiFi status. Is this your card...

Hi, For point 2 it will affect Windows if you load from Opencore. If you load Windows directly from BIOS, then there will be no effect. For point 5, it would be a good idea to try to restore F13, as I told you I had the same issue in the past when I first setup the system, and then it was...

Hi Vorshim92, Sorry I missed the part were it works if you remove the AMD Card. So regarding the PCIe Lanes part, the 1st and 2nd PCIe Slot as well as the M2A NVMe are connected to the Ryzen CPU. For a total of 20 Lanes 16x for the two PCIe slots (with a single card 16x with two cards 8x+8x)...

Hi Vorshim92 What BIOS version are you using, F12, F13 or later? I had also issues with F12. Gigabyte changed the DSDT on F13 (up to F15d is the same) and moved around some devices. I do not remember which ones, but after F13 I have no issues. You can try the following to check if it resolves...

@MacArthur Here is another suggestion that worked for me in my Ryzen B550, and its non-destructiove if you are careful when you type the commands!!! https://www.tonymacx86.com/threads/gigabyte-b550-vision-d-thunderbolt-3-amd-ryzen-7-3700x-amd-rx-5600-xt.304553/post-2285685 1. Samsung 970 EVO...

Hi NCMacGuy, It is better to remove sleepwatcher from the system preferences exclusion. Instead do one of the following: 1. Find sleepwatcher in finder and the right-click open and then press allow at the warning, or 2. in terminal write: "sudo xattr -d com.apple.quarantine...

Did you see what code was on the debug led when the board powered up? Did it say 15? Or 00? 00 means it was successful; any other code the update was not performed. I can also suggest that you flash 1st F10 version, and then go to F13. DO NOT TRY F14e!!! The USB can be formatted from macOS...

I would suggest to look at an ACPI issue, as suggested by CaseySJ in one of his threads, run the following command from terminal "log show --last boot | head -1500 > ~/Desktop/bootlog.txt" a file will appear on your desktop, open it and search for the ACPI tables that are loading and if any...

@NCMacGuy To create your custom script open terminal and type "sudo vi /etc/rc.wakeup", the vi editor will open with an empty file. Press "i" (you will see insert at the bottom of the window) paste the following on terminal: #!/bin/sh networksetup -setMTU en0 9000 networksetup -setMTU en0...

Hi NCMacGuy, First of all and to be clear the following is based on testing and experience, not on any documentation or any degree in BIOS software engineering! So no blaming me if something goes wrong.... Secondly, you have to be comfortable to flash you BIOS maybe more than once and then...