Recent content by Lacedaemon

Also, idk if I'm late to the party, but macOS Catalina runs great on this machine. The only extra thing I had to do was add the 'Change EC0 to EC' patch to Clover config.plist.

For anybody struggling with the dual displays via the HD 530 iGPU like I did, the following patch worked for me: Place the patch in your Clover config.plist, under Devices > Properties. To reproduce this patch from scratch, just run HackinTool and patch the 0x19120000 framebuffer as follows...

I can happily report that as of 20190129, on BIOS version 1.07, there are no issues using a Dell DW1560 on the Yoga 730.

This problem is covered in my Post #16. You need to make sure your USB ports are properly patched; you can read how I did it in Posts #23-28, or follow this guide.

My battery performance is usually reported as ~4-4.5 hours in Activity Monitor off a full charge on idle, though I haven't really tested whether that was true or not. This is in contrast to the ~7-8 hours reported by Windows on idle. For what I do, I haven't had cause for alarm as far as poor...

Yes; everything you need is in the OP. Good luck!

Hey, glad you got it working! All my findings are readily available by reading through this thread. :) Not at all. Make sure you have a T5 Torx screwdriver handy for the exterior screws, as a regular Phillips will not work. The screw holding down the WiFi card, however, is Phillips...

I'm using the DW1560 right now. No apparent problems from what I can see.

First off: you have duplicate OSI patches in your config.plist > ACPI > Patches. You only need one. I don't see VoodooI2C et all in EFI/CLOVER/kexts/Other. Did you put it in /S/L/E or /L/E? I also do not see it in your kextstat. Also make sure you're installing the right Satellite Kext. In...

No better time to get acquainted! ;) Here's a rough guideline: Paste the text from the SSDT-XOSI link into MaciASL. Save as an 'ACPI Machine Language Binary' file, then place the finished product in EFI/CLOVER/ACPI/patched. Paste the _OSI to XOSI rename patch into the correct spot in your own...

Correct. Be sure to select one with a compatible chipset. I'm sure you were on the right track. However, installing the kext is not enough; the Windows 10 patch must be applied to your DSDT. This can be done non-invasively with the use of RehabMan's SSDT-XOSI. Don't forget to install its...

The original WiFi card is Intel, so unfortunately no. Both the trackpad and the touchscreen work on the latest Mojave with the latest VoodooI2C.

So... would that not be HS02 in the updated file? That's what became active when I plugged in a USB 2.0 device to the same port. I set it to UsbConnector=0; should it be 3 like SS02? Thanks, I'll look around.

Great catch! I had only thought to test USB 3.0 devices and forgot to include that. Updated: While you're here: is there anything to be done about the USB-C Thunderbolt ports, or are we stuck with having to plug them in before boot?

For those interested, here's the SSDT-UIAC I've come up with for this laptop: I found in my testing that the USB-C ports (SS03, SS04) are handled by the Thunderbolt controller, so in order to use them [sans some kind of TB3 hot plug solution], you'll need to make sure you plug your USB-C...