Recent content by Kurto2021

if you look at my short history of posts you will see I was banging my head against the wall on this. I finally gave up and bought a cheap 8400gs video card. PLEASE add it.

no luck...I am going to try and slap in the 8400gs video card I have and see if that works

no it is set to ahci by default. The only change I make is to turn off sound card and switch the Video memory to 480. I just used the latest Unibeast here is the exact process. Boot Unibeast - App Store purchase of ML Install Unibeast Boot to Unibeast drive choose the MacHD - install...

nothing is optimized when booting through USB

Dell XPS Gen 4 - Almost there. - InsanelyMac Forum someone has done it

this makes no sense to me.... I set my bios to optimized defaults.......then disable sound......then choose 480 for the onboard gfx. On the install I select UserDSDT no DSDT file on desktop, SSDT for i5, MacMini as the system definition and the Atheros networking......When I boot I just...

Close but not yet....I am thinking there is an issue with the 2500K and PStates when using the MacMini system definition. I am looking through a 33 page posting now....this is exhausting.

I have been racking my brain with this damn board as I cannot get the HD3000 to work but I was wondering do I need to add a graphics card anyway if I am planning on using multiple monitors? I have heard you cannot get the VGA port to work once the HD3000 is recognized but was wondering if I...

well...I was wrong about the hardware....it's the HD3000 and the intel cpu is a 2500K.....I was just given the machine to fix this and it just asked him what cpu....anyway who cares about that.....why won't the HD3000 work?

how did you guys even get the HD3000 to work. I have a 2500K with a gigabyte Z77mx board and cannot get it to work

I can install just fine I get ethernet working just fine haven't messed with audio yet but the HD4000 is driving me nuts. I install with latest Unibeast then run multibeast 4.6.1 and choose USERDSDT and ATHEROS ethernet....I also have to choose Graphics Enabler = No 64 bit or I can't boot...

I am putting this together for a friend 600 miles away...hoping to make it as easy as possible to update.

It appears I won't be able to hold out for the MATX version of the board. I went ahead and bought the non TH version. I know it is VIA and Atheros so I am guessing it is in my best interest to disable lan and sound and just get a PCI card of the lan and a USB sound card for audio. Based on...

someone is about to get yelled at