Recent content by knidsrok

My setup: MB: GA-Z87X-UD5H CPU: 3.7 ghz i7-4770 Graphics: Intel HD 4600 Displays: 2 x Dell U2412M, 1 x Samsung 1080p HDTV I have the TV connected via the mobo's HDMI port (with HDMI audio enabled via sddt), one of the Dell displays connected via DVI, and the third Dell display...

Re: Boot:0 error on previously working installation? As I said in the initial post, I did not believe my hard drive was a 4k one as I'd had a working installation on it for several months before the Boot:0 error presented itself. Either way, the issue was resolved by wiping the disk...

Re: Boot:0 error on previously working installation? UPDATE: I followed the repair procedure as if it were the 4k HDD problem, which has not solved the problem.

So last night I started getting the Boot:0 error on my hackinstosh rig that had been running w/ no problems for months. I can boot up the Lion installation using a unibeast USB's bootloader, and I've tried running Multibeast again, as well as downloading and installing the standalone Chimera...

So I'm really happy with the performance and stability of my osx86 HTPC. Only thing is, it's a little noisy. I guess there are a few directions I can go in to address this, and was hoping for some input. My current build: mobo: GA-EP45T-UD3lR cpu: Intel 3 ghz Core 2 Duo ram: 6 GB 1333 Mhz...

Oh, and while Lotus and Mangabey worked equally well when I was using the rollback'd AppleHDA to get onboard audio, once I installed the AppleHDA kext patched for ALC888 to enable HDMI audio, only Lotus worked 100%.

I also have a Gigabyte Radeon HD 6850 on a board with ALC888. I was able to get HDMI audio to work using the patched AppleHDA from this thread: http://tonymacx86.com/viewtopic.php?f=16&t=29283

Hey. So, I had a perfectly working hackintosh system for a time, which then started periodically hanging and/or crashing. Was only occasional at first, but now is really frequent. The log file from the most recent crash reads as follows: Apr 16 13:48:52 Leo-McGarys-Mac-Pro...

Hi! Posting my DSDT as obtained via Snow Leopard, booted without a dsdt: GA-EP45T-UD3LR Bios F10 Rev 1.1 Geforce GT 220 1gb (I tried using the supposedly pre-edited dsdt for the mobo they've got over at kext.com, but it caused hpet issues.) Thanks in advance!