Recent content by Guddo

It was the power supply. Bumped up to a 650 and got to the BIOS screen. Thanks for the help! Incidentally, with my previous board (GA-H170N-WiFi, RX 580, CX500M), running Civ VI would crash the system. With the 650, Civ VI now runs fine.

The CustoMac mATX Buyer's Guide has Corsair CS 550 Watt, which only has the 4+4 CPU power supply (same as my CX500 M), not 4+8. (See image.) It appears the 650 class PSUs have 8+8. The MB manual notes that the middle 4 pins are only for the 8-pin connector, so presumably it's okay to connect...

[I mentioned this in my edit. I didn't post an update image.] I split the 8-pin into two 4-pins. The manual says, of the 12 pins, that the middle 4 are for a 2x4 plug, so I assume this is okay. The two 2x2s are on either side of the inner 2x2. Unfortunately, the result was the same after...

I have the following but cannot get to the BIOS boot screen. I searched for but couldn't find a Gigabyte troubleshooting guide. The hardware: Gigabyte Z390 M GAMING i5 9600K 2x 16 GB DDR4, seated in A2, B2 Corsair CX500M power supply using VGA output of MB to monitor Picture attached. I...

[Note: An admin moved this post to "General Help". Thanks!] Just noticed this got posted to the wrong category. I selected "Post Installation" -> "General Help", but my post came here.

On 10.14.2, I'm getting a strange bug where the year shown in Notes and MS Outlook is "76". For instance the summary shows: 4/13/76 but the timestamp on the actual item is: April 13, 2018 See attached screenshot. Microsoft wasn't able to diagnose this. Just observed this in Notes, so...

I've tried this using several different USB drives (at least 8GB) and on a Hackintosh running 10.9.5 and a Macbook Pro on 10.10.3. It gets almost to the end, but then the hang occurs. At the point it appears Unibeast starts to spin on something as the fan on my MBP goes much faster. I've...

> Does it always fail at the same point with each drive? Yes, I've seen the error several times. The Unibeast window stays open without any visible hint of an error, but the error does show up in the log files. When I quit through the file menu, Unibeast does seem to quit properly. I...

Unibeast detects an error. "install.log" attached. Apr 15 08:27:44 mugen-mbp installd[824]: ./postinstall: AttributeError: '_io.TextIOWrapper' object has no attribute 'next' Tried Unibeast 5.0.2 and 5.1 on 16GB and 32GB flash drives. Running on MacBook Pro running 10.10.

justein230, Thanks for the tip about setting the BIOS properly. It turns out I didn't have them set correctly. Also I hadn't mentioned that I also had a 1TB hard drive. The boot, however, still got stuck after: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34) I put my drives...

I'm not able to boot w/ the Unibeast USB flash drive or an SSD pulled from a working ASUS P67 running Mac OS 10.9.1 w/ Chimera 2.2.1. I have: GA-Z87N-Wifi, flashed w/ F5 BIOS i7 4770K SanDisk Extreme II 240GB GTX460 Booting hangs. I see the drive LED light turn on for a bit...

Re: Asus Sabertooth P67 working? The Firewire 400 on my Asus Sabertooth P67 is working. I worked fine for the Mac OS Migration Assistant. Lots faster than through my 100Mb ethernet.

Re: Asus Sabertooth P67 working? Hi sea_man, I appreciate the tip! However, w/ this ISO I get a kernel panic message similar to what I saw before: panic(cpu 0 caller 0xffffff8000548996): “Unable to find driver for this platform...

Does anyone have Mac OS running on a Sabertooth P67 with BIOS 1305? I haven't been able to get an initial boot w/ iBoot_legacy. (I encounter a kernel panic.) Details in the post below. Any ideas on how to proceed would REALLY be appreciated...