Recent content by Fidalco

Yes I went through several settings in my bios for TB, my setting match most of yours but I have a few xtra. As soon as I turn on TB in the bios I get that error, regardless of which options I choose, I have attached a copy of my Clover EFI folder if that helps. OsxAptioFix2Drv-64.efi. I also...

I have a ASUS Z170-WS that I was able to get setup following you guide but for some reason I cannot get the Asus TB3 device to work? The bios for my Z170-WS differ greatly in the TB choices compared to others bios I have seen posted in this thread. I am also running win 10 pro on another drive...

Thanks for the post and the hard work on setting this up. I am moving from a 10.10 Hacintosh with a Z68 gigabite MB to a Skylake Asus Z170-WS running dual m.2 and a Strix 1070. Will I need to add anything to my build or will the provided files suffice? TIA Fidalco

Have you looked into Carbon Copy Cloner? I was able to backup my drive and in the process create a Recovery HD. Fid...

When you setup Multibeast, make sure that TRIM support is disabled. I ran into the same issue and when I removed this the boot was fine and did not hang like you are describing. I had to use a third party TRIM enabler in order to get it to work. Fid...

Just got my system updated to 10.10.3 last night but it was touch n go. Try using, dart=0, nv_disable=1, -f -v. This worked for me and I was able to get the system to install but I had a lot of issues using Nvidia web drivers, finally had to use Pacifist to install the web drivers(system kept...

Have you tried this thread? http://www.tonymacx86.com/yosemite-desktop-support/143789-amd-r9-290x-yosemite.html Kiv...

I have an older Gigabit z68-UD3H-B3. I have used it for FCPX with a Samsung 512SSD, I7 Quad, 16 GB DDR-3 at stock speed and a GTX670 2G Asus for over 2 years now but I would like to add Thunderbolt 2 support. After a bit of research this seems to the only good card available for my system...

Hey giammyzanna, What bios are you using? I have almost the same setup as you(I have the ud3h-b3, I7 2600). I am using the version 10 of the bios but I do not have it overclocked. Fid.

The SSD 840 EVO is half as fast as the 840 Pro if you are in need of fast read/write. Also, I would look into a radiator solution/liquid cooling if you want to go without fan cooling. the list you show below is all about heat and i do not see you mention heatsinks for that 32 GB ram? Also bump...

Hey Pico, I am currently running Resolve 10 with Dongle on a hackintosh, GTX 670, model # GA-Z68-UDH-B3, I think. I use Mavericks and the GTX 670 as my main playback monitor. You should also check the forums on creative cow as there are many Resolve users who run Hackintosh...

Not sure if you read this article but it might explain the problems you are encountering: http://www.bit-tech.net/news/hardware/2013/11/19/intel-thunderbolt-ready/1 Fid.

Thunderbolt reference from apple dev list: https://developer.apple.com/library/mac/documentation/HardwareDrivers/Conceptual/ThunderboltDevGuide/Basics01/Basics01.html#//apple_ref/doc/uid/TP40011138-CH5-SW1 Fid.

Synth, Are you suing the Quadra as a primary card(for display) or as a render card(display not attached)? When you login to Davinci, are you using the ADMIN account or basic user? Do you have another graphics card to swap out for the Quadra? i run Resolve 10(with Dongle) and a GTX 670...

I have a dual boot system: Drive 1 Samsung 840 EVO 512GB Drive 2 Samsung 840 Pro 256GB Drive 2 has win 7 64 which I use for Steam but when i choose it in the "startup disk" Mavericks tells me, "the bless tool was unable to set the current boot disk"? Any idea on how to get this to work...