Recent content by dave_allen77

Now working perfectly!! Used the DSDT.aml file for my Motherboard and edited that with the recommended updates. Thanks for all your help. Just need USB 3.0 and that's a perfect install.

Everything unplugged except keyboard. Press sleep and it successfully enters sleep mode. Power light is flashing to indicate it is in sleep mode and the fans have all powered down. Press enter to exit sleep and it sounds like it has resumed but i don't get a display at all.

Thanks for your help anyway.

This edit compiled without any errors. When I try to make the PC go to sleep, the display turns off, the PC sounds as if it is about to go into standby, the power light starts flashing, then a few seconds later the PC powers back on but with out a display. I have removed all USB devices and it...

Sorry, knew it was something simple!

dsdt.dsl - Your file of 308.7 KB bytes exceeds the forum's limit of 195.3 KB for this filetype. dsdt.aml - Your file of 35.1 KB bytes exceeds the forum's limit of 29.3 KB for this filetype. Getting these errors when I try and upload files.

The lines I am getting errors at I haven't edited. All I have done is copy and past the two sections that were in the instructions. If I am right, to get the native DSDT you just need to extract the DSDT and save it as recommended by DSDTSE. Or am I missing something really obvious!!

No errors at all.

Hi, I have tried this DSDT update but when I compile it I get Compile error, check output windows for details. 255. Then when I look at the error log it tells me I have 49 errors. Most are Object does not exist errors. I made DSDTSE extract my DSDT, saved it to the recommended location and then...

Now have display working. Just pushing it but can i get two displays running from vga and dvi?

thanks for your help AppleMacidiot. tried the steps but get the spinning logo trying everything. The only thing i can think that may be a big stumbling block is that my graphics card is actually a vx5450 1gbk3-hv2 so am wondering if the device id may be wrong. can't find it on the net and can't...

Thanks for all your advice. Will be away from the PC for a weekend so will give this a go next week. So will let you know how it goes.

Sounds like a plan to me!!! I'll give anything a shot. Trying not to spend anything more than I can as Christmas has taken it's toll :)

I have just built my 1st Mac PC and have graphics working from the onboard graphics which is a hd2000. I have an external HD5450 card but have tried to get this working but i don't get a display after it boots. Can someone tell me if there is an idiots guide to getting this to work. Also I...