Gigabyte H77-DS3H
i5 3570K HD 4000 built in
HIS Radeon HD 7770
16GB RAM
IGFX set to primary and enabled
1 monitor attached via IGFX VGA. If I can boot into the OS this one always works.
I have 3 monitors on my 7770. All 4 were working reinstall.
On 10.8.2 which I fresh installed from...
Ok, i have my HD7770 working. Not perfectly but 3 monitors work.
Problems: Dell U2711 will not display resolution higher than 1920x1080 (native res 2560x1440). Might be because I only have a HDMI cable and no DisplayPort. will report back when i have displayport cable. HD4000 monitor max res...
Is Buri Framebuffer same as Clover Graphics Injector? I have gotten my 7770 to boot up but only on one of my two monitors and in a smaller resolution when using Clover Graphics Injector. However I also didn't really know what the options in there did, and fb-rotate doesnt seem to help either.
I have tried every suggestion in this thread thus far but still end up with white screen & cursor. What are your Clover boot strings? Are you using any AtiConfig or GraphicsEnabler?
My machine wont go to sleep either, by the way, with or without SleepEnabler installed. Don't know why but the...
I ask because I do not game so I assumed using the cheapest video was fine by me. I have used integrated motherboard graphics for as long as I can remember when building PCs.
I read somewhere on here that OS X is able to make use of the GPU for general system tasks (for general processing...
Thanks for your help!!
I am stuck at this step:
"Paste the copied code over the existing Device (PEGP), Device (GFX0) and Device (HDAU)."
Because I can not find device PEGP for my HD 6450.
Also, which version of AppleHDA to use with HD 6450?
Is it safe to install a version that is...
Thanks for your help, but I actually thought the GT 210 was hopeless and i traded it with my friend for his extra Radeon HD 6450 haha.
So I have the 6450 working over HDMI, but it puts out a static buzz to the TV speakers from the time of boot. On the GT 210 this would only happen once the OS...
But it shouldn't be the same case as XPostFacto because that worked in a different way. The hardware worked but the installer was blacklisting certain models even though they had compatible hardware.
As far as I can tell, for Mountain Lion, it's just driver issues because there are plenty of...
Could you please list what bluetooth hardware you are using on each? I just got one of these, another no name one but hopefully it'll be more powerful...
http://www.ebay.com/itm/180799272525?ss ... 144wt_1292
yeah, i tried it out on a friend's macbook pro where it worked flawlessly... i'm going to try and get a better bluetooth adapter first, hopefully it's not a software issue!
Using the exact build in my profile.
My Magic Trackpad keeps locking up every once in a while - at least once every five or six minutes unless I'm very careful to not make any quick or sudden movements with more than one finger.
If it locks up I can go to BTT live view and watch it... it gets...
I can boot my computer perfectly fine if I interrupt Chimera and type
-v UseKernelCache=No AtiConfig=Duckweed PciRoot=1
I have tried to set the same values in my org.Chameleonboot.plist, but it doesn't work and instantly goes to kernel panic.
apologies - edited my post!
but yeah, i ran multibeast and bridgehelper finally (lol) and now it boots with no issues whatsoever. here is what i put in my chameleon.boot.plist:
Kernel flags: darkwake=0 npci=0x2000
AtiConfig: duckweed
PciRoot: 1
that's it! will report back later when i try...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.