Recent content by beagio

  1. beagio

    [SOLVED] iPad Mini 2 Not Charging Clover Bootloader

    My mistake with regards to the USB port limit patch and HDMI audio SSDT. I should have mentioned that I removed both of them whilst testing a DSDT file and then put them back before you asked me to upload my Clover folder. The USB Inject & HighCurrent flags seem to have fixed my problem. My...
  2. beagio

    [SOLVED] iPad Mini 2 Not Charging Clover Bootloader

    Here's both my Clover folder and the DSDT I made, if you want to have a butchers. I'm thinking the two USB power problems, your charging, and my device failures, are related due to the changes Apple made to it's USB drivers since El Capitan.
  3. beagio

    [SOLVED] iPad Mini 2 Not Charging Clover Bootloader

    The problem I'm having with USB, that I think a patched DSDT would solve, is that all of my ports are under-powered. I have an app on my phone that shows it's only receiving 360mA from both my USB 2 & 3 ports (front and back), whereas it receives the full 460mA from a mains powered USB 2.0 hub...
  4. beagio

    [SOLVED] iPad Mini 2 Not Charging Clover Bootloader

    I'm really sorry for bumping such an old thread, but I don't that the posting rights to PM someone. VoiletDragon, is there any chance I could get a copy of your patched DSDT for the Z77-DS3H? I don't know if it's a problem with how I've patched mine, but I can't get Clover to load it. A known...
  5. beagio

    Choosing the right color profile

    Sorry to bump such an old thread, but I don't have the required post count to be able to PM mr-andrek directly. Does anybody know where I can find the zip file of the 60 colour profiles that was posted at the beginning of this thread? The original dropbox link is dead. Cheers
  6. beagio

    The Beast: i7 3770K | Z77-DS3H | Intel 4000

    I agree, but it would be a shame not to take advantage ;) I'll have a play this weekend using a spare disk.
  7. beagio

    The Beast: i7 3770K | Z77-DS3H | Intel 4000

    Hey dmeadows013. I currently have Mavericks installed on an almost identical system using Chimera. Funnily enough, I think It was your original guide that I followed when I first set it up. Quick question, how much of an improvement in boot time would you say you get using Clover and UEFI booting?
  8. beagio

    How to get Wake-on-Lan working on Z77 boards with HP NC360T

    Came here to say the same. It appears to wake up every two hours, although at no set time. Strikes me that a daemon is waking the computer for some reason.
  9. beagio

    How to get Wake-on-Lan working on Z77 boards with HP NC360T

    Right, just done some benchmarks using Cinebench and both 3DMark Vantage & 3DMark 11, and there's nothing in it. Each time, either with the NIC in or without, the scores were almost identical. I don't know if the Z77-DS3H is allowing the PCIe x16 to work at full bandwidth regardless of the NIC...
  10. beagio

    How to get Wake-on-Lan working on Z77 boards with HP NC360T

    Thanks for the reply. The card just turned up, so I'm going to run a series of benchmarks and see what happens. I'll report back in a while :)
  11. beagio

    How to get Wake-on-Lan working on Z77 boards with HP NC360T

    pumpkinwhite, quick question. If I placed one of these cards in a x4 PCIe slot and had a gfx card in a x16 slot, could I disable the NIC in the Windows device manager to allow the gfx card to operate at the full x16 or would it be dragged down to x4 simply by being plugged in? The loss of gfx...
  12. beagio

    Success: Mountain Lion Gigabyte GA-Z77-DS3H, i5 3570k Ivy Bridge, 16GB

    Sucess: Mountain Lion Gigabyte GA-Z77-DS3H, i5 3570k Ivy Bridge Hey djsmootht, do your USB 3.0 ports work with USB 2.0 devices or only with 3.0 devices? I have the same motherboard but can only use USB 3.0 devices in the USB 3.0 ports. The only way to get USB 2.0 devices working is to disable...
Back
Top