Recent content by barsqiue

At this point my colleague to whom I'm helping with the build, decided to get personal help from one of the commercial builders. I'm very grateful to @CaseySJ and you, @djbuddha, because your discussion helped us a lot in a past months. Of course, amount of Casey's work is just insane and I...

Thanks for the advice! Unfortunately, no luck. I've tried the jumper, header cable and no cable at all. TB3 devices work only in warm boot with jumper and header cable, no hotplug. Without any cable TB3 doesn't work at all. I've checked and double checked it.

Congratulations, @djbuddha !!! Don't you mind sharing your EFI folder? I'm stuck with hotplug on exactly the same motherboard and TB3 card both with custom and v43 GC-Titan Ridge (rev. 1) firmwares on 10.15.7. Everything worked almost seamlessly (except few graphic glitches) on 10.15.6, but I...

Same thing happened to me after installing latest security updates for Mojave and after I‘ve started using RX580. IDK what exactly led to this result, but it is how it is. My kind of solution is set Duet to “mirror” mode while HDMI display is connected, then reboot and disconnect the diplay...

Many many thanks to LeleTuratti ! Var. B) of METHOD 1 worked for me in the most awesome way. I can turn on and off my Apollo Twin (silverface) multiple times even if I boot with my interface disconnected. macOS Sierra 10.12.4 Gigabyte GA-Z270X-UD5 BIOS version F6d Thunderbolt Firmware 23+ TI...

Hi, I'm gald you made it through!:) Excuse me for not being able to help in time. I'm using 'User Autorisation' security level, but 'no security' also works.

Hi! Actually, I'm not using Apogee, I use RME Fireface UFX via USB and Apollo Twin Duo via Thunderbolt 3 only for UA plugins. I'm working in Logic Pro X, I'll try latest version tonight. Everything is quite stable, but once or twice in a week I face with crashes and message says it was because...

Sure, excuse me for late answer. This is content of root folder of EFI partition.

Hi! Excuse me for not being around recently! There was no specific step that I remember that made TH3 work, except one. I've install last Thunderbolt 3 drivers under Windows. Then I made sure Apollo works under Win10 (hot swap is possible, btw), then I played around with UEFI settings until I...

Success. Principal components: GIGABYTE GA-Z270X-UD5 i7 7700k ASUS GTX 650 Ti Samsung 960 EVO M.2 G.Skill F4-2400C15S-16GIS 16Gb x2 Universal Audio Apollo Twin Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter What works: NVMe SSD in M.2 slot as boot hard drive Ethernet USB 2.0, 3.0, 3.1...

Universal Audio Apollo Twin is up and runnig via Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter.

It is solution for situation when after Apple logo loading nothing happens, only black screen. https://www.******.com/r/hackintosh/comments/5y1lot/nvidia_black_screen_issue_got_you_down_imac151/

@tonymacx86, can you, please, describe what should I see in "Thunderbolt" and "PCI" System Report sections even when my TH device disconnected? And don't you mind show your BIOS configuration? My Apollo Twin Thunderbolt doesn't work not under Windows, not under Sierra 10.12.4. I got Z270X-UD5...

Not yet, I don't have appropriate device =( For now I can only see 3.1 bus in System Information and use with 2.0 devices connected to 3.1 port. During post installation I used Clover Bootloader as it mentioned in guide RomanoSoprano kindly posted in #84, that's where the drivers came from...

Success. GIGABYTE GA-Z270X-UD5 + i7 7700k + ASUS GTX 650 Ti + Samsung 960 EVO M.2 as boot hard drive. Ethernet, USB 2.0, 3.0, 3.1 works, RAM size and frequences, graphic card name and VRAM size are correct, audio line-out and headphone ports works with manual switch in sound prefs, haven't...