Recent content by amm8990

Yes, but not well. I needed support for WPA2/3-Enterprise / 802.1X for the University network "eduroam", so I had to use AirportItlwm.kext. The problem (ver. 2.0.0) is that after a while, the connection completely drops to 0 and I have to turn on/off the wifi card to regain internet :(

Hi, I also have 440 g6 laptop, but my wifi card is Intel 9560ngw, but the connector seems that is a little bit different. I googled and found that is called Key E CNVI (not KEY A+E). Does that mean that this adapter you posted would work for my car or they are mutually compatible? Here is the...

Now I am getting kernel panic when I run something that requires acceleration.

I tried to use the kext, and without success. So, I searched on the internet and found that Micron 2200 is not supported. Many people report kernel panic... :( https://dortania.github.io/Anti-Hackintosh-Buyers-Guide/Storage.html So, for now I have to replace it with a new one. Any suggestion?

Thnx. The procedure works, the only issue i have is the nvme m2 disk. Today, I put old sata 2.5 hdd and disable m2 nvme disk in bios and yes, I was able to install Mojave. So, I wonder if there is a possibility to install it on the nvme? For that purpose I have to use OC to boot also installer

I did disabled - VT-x - VT-D - Fast Boot - Wake on LAN - Wake On USB - Secure boot Tried Video memory 64-512MB, no changes In fact, with M2 SSD nvme disabled in BIOS, I managed to boot install with clover with the settings from https://github.com/jinmu333/HP_Probook_440_G6_EFI , just with the...

Thank you! Now stuck with this

No worries, I added missing kext, and that partially resolved the situation. Now I am stuck with I said partially because I am stuck with "End random seed" However, all this with my M2 SSD disabled, when I enable the SSD in Bios, the PC just restarts after starting the Opencore bootloader...

The same problem. Actually, if you look the Opencore log file in EFI it passes this stage and then show critical error on the next during bootup of the installer. You just have to add -v in the boot arguments to see it. However, no information why there is an critical error, maybe my opencore...

I finally figured out what causes the problem. I have M.2 SSD drive that produces the following error: lilu: (user) failed to change memory protection and consequently kernel panic. Disabling M2 SSD in BIOS allowed me to boot the installer, but as expected I don't see any drive in disk...

Hi everybody, I have HP Probook 440 G6 8vt99es CPU Intel i5-8265U at 1.6GHz Motherboard HP 8537 Graphics Mesa Intel UHD Graphics 620 (WHL GT2) Screen 1366x768 Audio HDA-Intel - HDA Intel PCH I tried both Clover and OpenCore configuration from the previous post, changing the screen res to...

Is there a solution to the problem with restoring bootmgfw.efi and Windows 8.1? It is really strange, I have had Yosemite and Win 8.1 before, and today, I got my ssd and I decided to do fresh install of both systems; Currently whenever I boot windows, the file bootmgfw-orig.efi is renamed to...

I have hp4530s and I have tried to remove BTFirmwareUploader.kext for the 2nd time, and I experience the same problem as before. Webcam and USB ports are constantly switching on/off, putting back .kext solves this problem, but my computer crashes on every wakeup :eh: Any solution?

Do you loose USB and Webcam functionality by removing BTFirmwareUploader.kext?

I had the same problem, and solved by running hp tool and installed all kext again. Does installation of BTfirmwareuploader.kext again cause reboots after sleep? In my case yes, laptop reboot quite often :banghead: I don't even use BT, can I disable it totally?