Does someone know the boot flags for intel HD4600 GA-H87M-DH3 INTEL i3-4330 ?

[SOLVED] Any build success with GA-H87M-D3H + INTEL i3-4330 ?

Hello to All, I've followed all step's of the UniBeast: Install OS X Mavericks on Any Supported Intel-based PC I 've updated the BIOS : H87MD3H.F4 to H87MD3H.F7 with Q-Flash utility, thanks to a previous post on how to for the BIOS update. And I've tried to boot with recommanded flags from Guides: -x -v GraphicsEnabler=No, IGPEnabler=Yes, PCIRootUID=1, npci=0x3000 but I have the error below : (attached screen copy) BootCacheControl : Unable to open /var/db/BootCache.playlist : 2 No such file or directory panic (cpu 1 caller 0xffffff80006646f8) removeSymbol com.jetico.kext. count 4504 "@ .....OSSSymbol.cpp:373 My build is

1. GA-H87M-D3H
2. i3 4330 3.5GHz Socket 1150
3. DDR3 KINGSTON Hyper X Blu Red Serie XMP 8G (2x4Go) PC12800 1600
4. box: FRACTAL DESIGN CORE 1000
5. power supply CORSAIR VS350 - VS Series 350 W
6. HardDisk SEAGATE Barracuda 7200.14 - 2 To ( 2000 Go ) - SATA 6Gb/s - 7200t/m
7. LCD IIYAMA 22" 1680x1050 connected via DVI cable

I've created with success a USB key with Maverick 10.9.2 with uniBeast 3.0.1 2. Then I've done all BIOS setting advised,

1. Set to Optimized Defaults,
2. Set X.M.P. Memory Profile to Profile1,
3. and Desable supports VT-d

please advise, thanks, jbnewbie

Well, I did not fix my boot problem with USB stick and Unibeast, but I've created a small 250Gb partition and I've quickly installed a Ubuntu system with grub-efi boot loader to be sure that all the hardware is working well, and it is ! Also I'll try next with flags : -v, -x, -f, maxmem=4096, GraphicsEnabler=No, IGPEnabler=Yes, PCIRootUID=1, npci=0x3000

[SOLVED] Does someone know the boot flags for intel HD4600 GA-H87M-DH3 INTEL i3-4330 ?

SOLVED Finally I manage to install my build with Maverick system with the USB key, and without too much boot flags, just -x -v But I had to format the 2Tb disk with HFS+ (journaled) before than to be able to run the installer on the uniBeast USB key. This is maybe not well pointed in the customac install guide, if your are using a "big" disk, but 2Tb is quite common now, you must have to format it with a previous Mac or Build before than to use it with uniBeast. Appart from that all is running well without DSDT, this build is really cheap and afordable in my country, and I do recommend it.

i am also looking forward to build this ..... is this working fine ???
or ther are some broblems