Enable higher resolution with HD4600

[RehabMan]

Hey Bud, I have the same problem, tried all possible solutions, IGPlatformID (ALL), Intel AzulFB=1 to 15 and it still show no kext loaded but recognises the card, is there any way you can upload the azulfb kext somewhere, ty

Are you using Chameleon? IntelAzulFB is only valid with Chameleon and only effective if GraphicsEnabler=Y is specified. And it is IntelAzulFB, not "Intel AzulFB".

 

[ascianabhro]

Are you using Chameleon? IntelAzulFB is only valid with Chameleon and only effective if GraphicsEnabler=Y is specified. And it is IntelAzulFB, not "Intel AzulFB".

Rehabman, I am using chimera latest, I put GraphicsEnabler=Yes & IGPEnabler =Yes on org.chameleon.Boot.plist, then at the time of booting with -v I tried different values of IntelAzulFB, under system information, extension I see that AppleIntelFramebufferAzul and AppleIntelHD5000Graphics kext is loaded, any ideas what am I doing wrong, I also tried with GraphicsEnabler=No & IGPEnabler =Yes on org.chameleon.Boot.plist with IGPlatformID, when I scroll within the finder window the scroll bar flickers, some website opening causes screen flicker, is this due to the Graphics issue, looks like I screwed up at the first place by buying this Intel board, any help will be appreciated. ty

 

[RehabMan]

Rehabman, I am using chimera latest, I put GraphicsEnabler=Yes & IGPEnabler =Yes on org.chameleon.Boot.plist, then at the time of booting with -v I tried different values of IntelAzulFB, under system information, extension I see that AppleIntelFramebufferAzul and AppleIntelHD5000Graphics kext is loaded, any ideas what am I doing wrong, I also tried with GraphicsEnabler=No & IGPEnabler =Yes on org.chameleon.Boot.plist with IGPlatformID, when I scroll within the finder window the scroll bar flickers, some website opening causes screen flicker, is this due to the Graphics issue, looks like I screwed up at the first place by buying this Intel board, any help will be appreciated. ty

IntelAzulFB is only implemented in Chameleon. Not applicable to Chimera. Chimera uses different flags... see: http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera.html

 

[ascianabhro]

IntelAzulFB is only implemented in Chameleon. Not applicable to Chimera. Chimera uses different flags... see: http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera.html

RehabMan, Thanks for answring, I have tried all these flags, some of these will get the card recognized as HD4600 but graphics ram amount change on BIOS has no effect, stays at 64 MB and shows no kext loaded, no QE/CI, translucent menu bar is not there, I dont see that as an option under system pref, Desktop/Screen saver, any idea whats happening, am I missing something crucial.

 

[RehabMan]

RehabMan, Thanks for answring, I have tried all these flags, some of these will get the card recognized as HD4600 but graphics ram amount change on BIOS has no effect, stays at 64 MB and shows no kext loaded, no QE/CI, translucent menu bar is not there, I dont see that as an option under system pref, Desktop/Screen saver, any idea whats happening, am I missing something crucial.

Boot "-f" to make sure kernel cache is not damaged. Note that IGPlatformID has no effect without IGPEnabler=Y or GraphicsEnabler=Y.

Post some details on what you're doing. eg. org.chameleon.Boot.plist and/or ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html

 

[ascianabhro]

Boot "-f" to make sure kernel cache is not damaged. Note that IGPlatformID has no effect without IGPEnabler=Y or GraphicsEnabler=Y.

Post some details on what you're doing. eg. org.chameleon.Boot.plist and/or ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html

RehabMan, Here is the details of my org.chameleon.Boot.plist, IOReg attached, also when I use -f it gets stuck at BluetoothHCIController-completed. Thanks again for all your help.

<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>IGPlatformID</key>
<string>04120006</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string></string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>6</string>
<key>UseKernelCache</key>
<string>Yes</string>

 

[toleda]

<key>IGPlatformID</key>
<string>04120006</string>

Not a valid Azul framebuffer.

 

[ascianabhro]

Not a valid Azul framebuffer.

changed it to 04128086, same problem, will show no kext loaded, no QE/CI

 

[RehabMan]

changed it to 04128086, same problem, will show no kext loaded, no QE/CI

Also not a valid frame buffer.

Refer to this post so you know the valid values: http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera.html

 

[ascianabhro]

Also not a valid frame buffer.

Refer to this post so you know the valid values: http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera.html

Rehabman, I just tried all the boot blags with IGPEnabler-Yes & IGPlatformID=then the flags it gets stuck at AGPM Controller-unknown platform, I am attaching a picture for reference, the only two IGPlatformID will let me get to the login screen is 04120006 & 04128086, not sure what am I doing wrong, ty