Contribute
Register

Gigabyte Z690 Aero G + i5-12600K + AMD RX 6800 XT

Does anyone here use a Logitech MX Keys and MX 3 mouse? I had it connected via bluetooth, but bluetooth doesn't work on boot (BIOS, boot picker). They only work when Mohave loads. Apparently HID proxy needs to be supported, and I don't think this combo does. I switched back to the receivers, but they stutter often.

I'm using the BCM94360NG m.2 card. Anyone else have this experience or found a workaround?
Bluetooth singal confilcts with 2.4G wifi. Others said switch to 5G wifi might be better if use bluetooth with mx mouse.
 
Yes, is better using an 5G wifi while you use Bluetooth. Also I use a cord mouse, so may be the stutter is about using two IR products together.
 
Bluetooth singal confilcts with 2.4G wifi. Others said switch to 5G wifi might be better if use bluetooth with mx mouse.
I don’t get Bluetooth stutter, which is why I want to use it. But it doesn’t work for BIOS and boot picker.

I get stutter on the 2.4g receivers. Separating them into 2 vs 1 unifying receiver has helped.
 
You can select Bluetooth, like creating a new profile, and then select Bluetooth in macOS, so you have signal in BIOS, too.
 
@Jeson I used your EFI and my Aero D is booting but only the 2.5G Network port works not the 10G port. How can I get this working?
 
@CaseySJ,
Please post a screen snapshot of the OC 0.8.0 or 0.8.1 config.plst' Kernel page. It appears my kexts are in the wrong order and some are no longer required for our build. TIA.
 
While I continue to struggle with this blasted Z490 Vision G..........

@CaseySJ what is your opinion on the Aero G build? Stable? Everything works? I had thought of stopping at Z490/10th gen since apple went Silicone, but if Z690 is working well .....
 
@CaseySJ,
Please post a screen snapshot of the OC 0.8.0 or 0.8.1 config.plst' Kernel page. It appears my kexts are in the wrong order and some are no longer required for our build. TIA.
This is from the most recent backup of my Z690 Aero G EFI folder:
Screen Shot 2022-06-09 at 2.43.21 PM.png
 
While I continue to struggle with this blasted Z490 Vision G..........

@CaseySJ what is your opinion on the Aero G build? Stable? Everything works? I had thought of stopping at Z490/10th gen since apple went Silicone, but if Z690 is working well .....
My Z690 Aero G was extremely reliable. I retired it recently due to of lack of space in the house -- at one point I had 8 Hackintoshes. If you need Thunderbolt, the only recommended option on this system is a GC-Titan Ridge (either V1.0 or V2.0; flashed card is preferred).
 
@Casesj,

Thank you for the Kernel OCC snapshot. Please update Post#1's OCC snapshots as they're 0.7.8 (IRC). Thank you very much.
 
Back
Top