Contribute
Register

MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

danny2305 said:
you even fixed my monitor problem, I have a samsung m8 and it didn't work on the thunderbolt despite the egpu displayport cable to the titan's mini-displayport input... now it can be plugged in and the webcam also works ;)
Click to expand...
Thats because now you have a full Thunderbolt Bus like a real Mac. It enables things like 10gb Ethernet over TB, TB monitors, some audio interfaces, etc...You did it the right way by flashing it.

As for the RGB I'm actually not familiar.
 
When I USB mapping according to your instructions. Then the rear USB 2.0 port does not work. Front USB 3.0 does not accept USB 2.0 devices. How to fix. Thanks
 
monster101036666 said:
When I USB mapping according to your instructions. Then the rear USB 2.0 port does not work. Front USB 3.0 does not accept USB 2.0 devices. How to fix. Thanks
Click to expand...
Quite strange. Could you remove your serial number and send me back your EFI?
 
monster101036666 said:
Thanks
Click to expand...
You are using USBInjectAll. This blindly enables all ports so that we can map them. Please remove it from your config and EFI and replace it with my USBPorts.kext attached.

You'll need to refer to Post 1 about editing it however. Its not too hard, just take your time. I've already listed all the ports on the board so you dont need any 3rd party apps or processes. Simply follow the guide.
 

Attachments

  • USBPorts.kext.zip
    2.4 KB · Views: 48
I LIKE IT
 
Thank you so much for your comprehensive guide and EFI. I was able to get everything up and running on Big Sur with the same motherboard (Wi-Fi) but a 12900K and 6800 XT. Thank you for all your hard work! :)

Would you recommend I do a fresh install for Monterey? Or could I use the update process? Thanks!
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top