Contribute
Register

The everything works Asus Z390-I Gaming * i7-8700K * SAPPHIRE NITRO+ Radeon RX Vega 64 Build

failed to open /private/var/db/systempolicy confutguirator/ hardening exceptions.plist
jessesolomonscott said:
Used in verbose mode.....

Screen off after these pics....

Halted few seconds at..... Failed to load hardening exception. Plist..... And bootstrap......

Help me please View attachment 398849View attachment 398850View attachment 398851View attachment 398852View attachment 398853View attachment 398854View attachment 398855View attachment 398856View attachment 398857View attachment 398858View attachment 398859View attachment 398860View attachment 398861View attachment 398862View attachment 398863View attachment 398864View attachment 398865
Click to expand...


Same verbose.... screen off after this verbose....... even tried reset my CMOS but same screen off.....
I don't even know those errors in verbose to figure out what's happening as I'm new to hackintosh.....
I'm not able to find any other builds with Asus z390-E...... help me please.....
I really need this hackintosh.... my first build.... Thanks in advance
 
I tried verbose mode......... its showing lots of errors....... I don't know if they are errors or they are ok but.... so many errors like ......failed to load..... environment load fail..... somethings like that
 
I'm using sandisk 16GB pendrive...... is there any problem in my pendrive? I've done everything as #1 says
 
I have 8GB RAM installed ......... should I need 16GB RAM?..... is it any problem?
I have 2.5' SSD.... should I need M.2?.... I'll buy if its necessary

My build:
Asus Rog Strix z390 - E
i3 8100
I want to use iGPU for now..... even WiFi is not required now...
8GB Corsair 3000 MHz RAM.
128 GB 2.5' SSD.... installed Windows on this SSD.
256 GB 2.5' SSD.... planning to install macOS on this.... its formatted into NTFS... should I connect it with USB to SATA and format it to HFS+ or AFPS?

Asus VZ229H Monitor.
I think I specified everything but don't know the problem...
 
ModMike said:
No, Are you using the latest BIOS and posted EFI
Click to expand...
Yes I just downloaded 20 mins ago and I'm using that.....

I'm creating pendrive using UniBeast.... and I'm deleting EFI folder in EFI partition and replacing that with your EFI .....

Doing everything as per the post.
 
I forgot you had an E board, haven’t had luck with those.

I may need to strip patches and build you a custom EFI. Can you start and at Clover press F4 to dump the DSDT and send me DSDT.aml file in your Clover origin directory. I will only be back in about 3 hours and can only help then.
 
ModMike's The Everything Works Build
ROG STRIX Z390-I GAMING |  i7 8700K |  Vega 64 8GB
Just checked that my BIOS is not updated to latest version..... it's updated to 01/29/2019..... I'll update it now and check if the problem is solved....
I'll send that DSDT.aml file also if its not working.....
Thanks so much
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top