[Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

[RehabMan]

However it's just missing the one part about setting the graphics ID to 0x12345678 to get it to correctly boot

In my case, it works without doing that...
But using an invalid ig-platform-id is always an easy way to eliminate potential graphics issues (as it prevents graphics kexts from loading).

 

[RehabMan]

I tried it on just the ig-platform-id but it kept resetting. Is it where I will keep having to input it until it will work kind of thing?

Finish post-install steps as written in post #1, and you won't need to use the invalid id.

 

[Realness]

Finish post-install steps as written in post #1, and you won't need to use the invalid id.

Got there in the end. I used this script https://github.com/RehabMan/Intel-NUC-DSDT-Patch/blob/master/config_install_nuc8_bc.plist and changed the platform & FakeID to 0x12345678

Thanks RehabMan

 

[PWGuy]

You forgot to provide the output. Please read post #372 again. Carefully.

Sorry, I initially thought the "-l" was a number one but it's a lower case L.

 

[likecyber]

I just got NUC8i7BEH and followed this guide.
But it doesn't continue to boot into macOS after install process.
It keeps rebooting when I boot into installed macOS on my SSD.
There is no issue at all while installing macOS.

I believe it is "Execute Disable Bit", as I can't find this setting on my BIOS.
Does anyone know where this setting located on NUC8i7BEH's BIOS ?

My device is NUC8i7BEH with BIOS version 056.

 

[zzmadd]

Hi all,

@RehabMan
I have an Intel NUC NUC8i5BEH with Intel Iris Plus Graphics 655.
I'm using AptioMemoryFix-64.efi + EmuVariableUefi-64.efi
I followed this guide BUT a couple of things unluckily don't work and create a bit of a discomfort.

- 1st Native audio works right after boot BUT after sleep or a sleep attempt (see next point) audio gets corrupted and quality hugely drops and it becomes unusable. So after sleep or sleep attempt audio is unusable.
- VoodooHDA works after sleep but I'd rather use Apple native Audio.

- Sleep works if I don't have USB discs or thumb drive connected. If I've got a USB disc or thumb drive sleep doesn't work. The sleep attempt leads to a bounce that continues up to a kernel panic and reboot. System tries to sleep and bounce, then tries again and bounces. What's interesting here is the USB disc gets ejected but still sleep doesn't work. BUT IF I REMOVE such USB disc or thumb drive THEN Sleep works nicely. If to be connected is a USB WiFi adapter, then sleep works nicely too.

- Ethernet stops working right after log in. What's weird here is that if there's any USB device connected to the NUC, including a WiFi adapter than ethernet continues working. I mean ethernet continues working not the stream of data through WiFi (which is at place n 2 in System Preferences / Network)

Before I drop all the files is there anything I can try?
I have Wake on LAN disabled both in Bios and MacOS (even though it makes no difference).

 

[BillyGoatGruff]

I just got NUC8i7BEH and followed this guide.
But it doesn't continue to boot into macOS after install process.
It keeps rebooting when I boot into installed macOS on my SSD.
There is no issue at all while installing macOS.

I believe it is "Execute Disable Bit", as I can't find this setting on my BIOS.
Does anyone know where this setting located on NUC8i7BEH's BIOS ?

My device is NUC8i7BEH with BIOS version 056.

I have the EXACT symptom/problem... I have the NUC8i5BEB and BIOS 56. looking forward to the replies.

 

[PWGuy]

Sorry, I initially thought the "-l" was a number one but it's a lower case L.

View attachment 374880

I figured it out - thanks!

 

[davids74]

Sorry, how do you run the HDMI audio part separately from others. I found _hda_subs.sh but I do not understand where is it run from and how is it included?
Just dragging it into Terminal does nothing. Or does too quickly to notice anything.

 

[ethan3474]

Guys, I am stuck. I have successfully installed macOS Mojave on my NUC8i7BEH. Everything is working fine except the Ethernet. When I plug my Ethernet cable in, about 15 seconds later, macOS crashes and reboots into clover. When I unplug it, It works fine with no issues. I am using IntelMausiEthernet (suggested by the guide). Does anyone know what is happening? Thanks.