I success to install high sierra on my laptop.
But I replace WiFi card to DW1820A, I got error.
Does anyone have any idea? thanks.
Laptop: ASUS Vivobook S15 S510UN i7-8250U
MX150 + Intel 620
Dunno. I've replaced with Broadcom BCM94352Z NGFF M.2 FRU 04X6020 (Lenovo NGFF 802.11AC 867Mbps BT4.0). You also need to write if macOS booted fine before your replacement.I success to install high sierra on my laptop.
But I replace WiFi card to DW1820A, I got error.
Does anyone have any idea? thanks.
Laptop: ASUS Vivobook S15 S510UN i7-8250U
MX150 + Intel 620
Dunno. I've replaced with Broadcom BCM94352Z NGFF M.2 FRU 04X6020 (Lenovo NGFF 802.11AC 867Mbps BT4.0). You also need to write if macOS booted fine before your replacement.
As per rules, please update your hardware profile to allow others to help you easier@RehabMan @bugsb thanks for yours reason
I have re-extracted and re-patched acpi.
DSDT Patch applied to dsdt.aml SSDT-8.aml SSDT-9.aml
- Asus N55SL/Vivobook for battery
- Fix _WAK Arg0 v2
- USB _PRW 0x6D Skylake (insant wake) for sleep fix
- Shutdown fix v2
- Rename _DSM methods to XDSM
- All Asus FN patch in necessary folder
- fix_PARSEOP_ZERO
- I2C PATCH
- Add Window10 Patch
- Add GPIO Controller Enable
- Disabling discrete graphics in dual-GPU laptops
Thanks!
@RehabMan @bugsb thanks for yours reason
I have re-extracted and re-patched acpi.
DSDT Patch applied to dsdt.aml SSDT-8.aml SSDT-9.aml
- Asus N55SL/Vivobook for battery
- Fix _WAK Arg0 v2
- USB _PRW 0x6D Skylake (insant wake) for sleep fix
- Shutdown fix v2
- Rename _DSM methods to XDSM
- All Asus FN patch in necessary folder
- fix_PARSEOP_ZERO
- I2C PATCH
- Add Window10 Patch
- Add GPIO Controller Enable
- Disabling discrete graphics in dual-GPU laptops
Thanks!
Hey !
I have a Asus vivobook x510UNR model.
I installed high sierra 10.13.0 on my laptop. I can boot using the provided EFI folder (with VoodooGPIO kext disabled). But when i try to patch my own DSDT, it gets stuck at IOConsole 3 error with PEGP-A newuserclient failed flashing repeatedly (photo attached). I only replace the DSDT.aml in clover. All other SSDT are the same from the EFI ready folder.
I have not installed any other kext/driver on the OS itself. Its a clean vanilla install.
I have applied all patches listed in the README.md on github and an extra Fix all _PARSEOPZERO aggressive patch.
Plz help.
PS. I have a nvidia mx150m gpu on this laptop. I tried disabling it in ssdt earlier but it didnt work.