macOS 10.13.3 Update

[rudimania]

How do you fix bugs? Can you guide me,Please?

It took time and patience to get through debugging the problems I was having. one thing I did was videotaped the boot load and from that I was able to frame by frame view that I was having a kernel panic in the AppleIntel E1000e kext . so when I saw that I searched my directories to see what version is I had and found that I had one that was three years old sitting in library extensions. I removed that I reset the rights. installed the newer driver, installed the Mac update and worked with no problems.

 

[pit512]

I had some problems with the Nvidia driver. To fix the problem, I removed everything related to Nvidia on s/l/e l/e and kext/others. Then I proceeded to place NVWebDriverLibValFix and Lilu under /kext/others and all worked just fine after that.

With latest releases of Lilu + NvidiaGraphicsFixup you don't need NVWebDriverLibValFix...
This mix can even cause a crash at startup!

 

[flaviolenzi]

Hello to everyone!
I have freshly download High Sierra 10.13.3 from App Store but Clover 7.1.1 don't recognise them... anyone have these problem?

 

[P1LGRIM]

I have freshly download High Sierra 10.13.3 from App Store but Clover 7.1.1 don't recognise them... anyone have these problem?

No such thing as Clover 7.1.1, if you mean UniBeast 7.1.1 then that is for Sierra.
If you want to install High Sierra you should use UniBeast 8.1.0.

 

[rudimania]

With latest releases of Lilu + NvidiaGraphicsFixup you don't need NVWebDriverLibValFix...
This mix can even cause a crash at startup!

If you use 14,2 profile I would not recommend nvidia fix, causes line artifacts across my screen if I use it

 

[pit512]

If you use 14,2 profile I would not recommend nvidia fix, causes line artifacts across my screen if I use it

With a Skylake CPU, as wdiaz503 uses, it is recommended to use a 17,1 SMBIOS...

Edit: Sorry wdiaz503 uses a Kaby Lake CPU, so it's a 18,x SMBIOS that is recommended.
Anyway, I also believe that the combination of the 18,x SMBIOS and a Maxwell Nvidia GPU needs a fix.

 

[JCMunsonII]

Updated Clover to 4392 prior to update. Update installed without any issues.

 

[JCMunsonII]

@mangyver - Per RULES, please update your profile with your system parameters.

 

[Dith]

Could someone confirm what driver to download for 10.13.3 ? the ".25.156" (the laggy one, with bugs etc) or the older one "378.10.10.10.25.106" you recommand ?
cause in step 1 "latest driver" is mentioned, it's a bit confusing ...

You should use .106 as that's the latest driver without issues. It's the driver released with 10.3.2. I personally haven't tested the InsanelyMac repackager but I looked at the code and it extracts whatever file is there with .pkg as extension and uses commandline tools to get the build version. Just make sure you have 10.3.3 installed before you run the repackager and it should work.

 

[editdroid]

Try nvda_drv=1
or try using Unibeast USB to boot that installer

I already had nvda_drv=1 selected. I tried both on and off with same results.

I'll have to make a Unibeast USB. How do I apply the update through that?

Thanks.