Hp Envy 13 d006 Skylake multiple problems

[RehabMan]

This time was missing the aDummy.kext in the kext section. Now I fixed it.

Here are the files

Your kextcache output still shows no patched AppleHDA components installed.
You should not expect aDummyHDA.kext to work from EFI/Clover/kexts.

In fact, all kexts you need should be installed to the system volume.
Read guide, post #2:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[Pocchio]

I have installed it in S/L/E and in L/E but the output of the kextcache command is always only the KernelCacheID

 

[RehabMan]

I have installed it in S/L/E and in L/E but the output of the kextcache command is always only the KernelCacheID

You must boot without caches, then rebuild cache (as per FAQ).
Also, you should install it only in /S/L/E *OR* /L/E, not both (pick one).
All kexts you need should be installed to the system volume (to one of /S/L/E or /L/E).

 

[Pocchio]

How do I boot without caches? I do not see the option in clover

 

[RehabMan]

How do I boot without caches? I do not see the option in clover

Kernel flag -f

 

[Pocchio]

Ok It took me a while but I managed to install the kext in S/L/E and now kextcache output at least shows the aDummt.kext but unfortunately I still have no divide output found.

I have attached all the files.

 

[RehabMan]

Ok It took me a while but I managed to install the kext in S/L/E and now kextcache output at least shows the aDummt.kext but unfortunately I still have no divide output found.

I have attached all the files.

set config.plist/KernelAndKextPatches/Debug=true
Then boot and see if AppleHDA is being patched as you expect.
If it is not being patched, then it is either a Clover problem or a problem with kernel cache.

 

[Pocchio]

I think it was a cache problem because now audio works correctly.

One other problem is that every time I log in brightness is at 100% and I cannot use dedicated keys to adjust it (but in preferences/monitor is working).

Since I am using HWPEnable and other PM properties in Clover, should I delete the SSDT generated using ssdtGen script?

From the files that I have uploaded, can you tell if PowerManagement and all the other things are working correctly?

 

[RehabMan]

One other problem is that every time I log in brightness is at 100% and I cannot use dedicated keys to adjust it (but in preferences/monitor is working).

Make sure you installed "RC scripts" (as you have EmuVariableUefi-64.efi).
Check that NVRAM is working correctly.
Brightness keys are covered in the main brightness guide (linked from the FAQ).

Since I am using HWPEnable and other PM properties in Clover, should I delete the SSDT generated using ssdtGen script?

Find an ACPI dump from a Mac that uses HWP (Intel SpeedShift).
Your answer will depend on whether you find APSS, APLF, etc.
No matter what, you still need to inject "plugin-type" on CPU0.

From the files that I have uploaded, can you tell if PowerManagement and all the other things are working correctly?

You did not implement PM correctly.

 

[Pocchio]

What did I missed in implementing PM?

And NVRAM is working correctly but the brightness is always at 100% at login