【sloved】10.12.3 faile to boot after shutdown

[crackself]

my device is dell 7559 with bios version 1.0.1,serria 10.12.3 work fine on it before last shutdown(Clover ver.1012 UEFI).with not change anything,it faile to boot.the screen shows PTIDSensors: started and stop ,after a while it show error with a line looks like still wait for root device(I'm sure that was set ahci model in bios,,I have try both Clover or clover legacy but got same error).
thanks for help!
here is the snapot and CLOVER.zip:
reupload the files:


caused by uefi（1.0.1） firmware，after reinstall and patched *aml it have been solved.

 

[crackself]

also try to boot with an install usb media(which one I use to install OS on SSD),stil fail

 

[jed852]

my device is dell 7559 with bios version 1.0.1,serria 10.12.3 work fine on it before last shutdown(Clover ver.1012 UEFI).with not change anything,it faile to boot.the screen shows PTIDSensors: started and stop ,after a while it show error with a line looks like still wait for root device(I'm sure that was set ahci model in bios,,I have try both Clover or clover legacy but got same error).
thanks for help!
here is the snapot and CLOVER.zip:

View attachment 239118 View attachment 239119

I might be wrong but "Still waiting for root device" means that the OS lost access to the boot files, check you bios maybe it reseted without your consent.

Check if SATA mode is set do AHCI also check the EHCI or xHCI handoff, if neither works on clover options try to check "Inject USB" and/or "Inject USB ownership" those are good start points IMO.

 

[crackself]

I might be wrong but "Still waiting for root device" means that the OS lost access to the boot files, check you bios maybe it reseted without your consent.

Check if SATA mode is set do AHCI also check the EHCI or xHCI handoff, if neither works on clover options try to check "Inject USB" and/or "Inject USB ownership" those are good start points IMO.

thanks,it may to do with the boot files access,I will try and feed back.

 

[jed852]

thanks,it may to do with the boot files access,I will try and feed back.

Yeah do that, also try to uncheck/check "Drop OEM SSDT" it some cases it can lead to this error too. you need to DROP them if you are using patched SSDTs anyway so, yeah check that too.

 

[RehabMan]

my device is dell 7559 with bios version 1.0.1,serria 10.12.3 work fine on it before last shutdown(Clover ver.1012 UEFI).with not change anything,it faile to boot.the screen shows PTIDSensors: started and stop ,after a while it show error with a line looks like still wait for root device(I'm sure that was set ahci model in bios,,I have try both Clover or clover legacy but got same error).
thanks for help!
here is the snapot and CLOVER.zip:

View attachment 239118 View attachment 239119

Read FAQ, "Problem Reporting"
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[crackself]

Read FAQ, "Problem Reporting"
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

yes man, I read the part and do follow it,now reupload the correct CLOVER.zip.but there's a problem——the Boot verbose flash too fast that I can't photo all of them.

 

[crackself]

Yeah do that, also try to uncheck/check "Drop OEM SSDT" it some cases it can lead to this error too. you need to DROP them if you are using patched SSDTs anyway so, yeah check that too.

Yeah do that, also try to uncheck/check "Drop OEM SSDT" it some cases it can lead to this error too. you need to DROP them if you are using patched SSDTs anyway so, yeah check that too.

Try but not help,it may not to do with the patch(it work smoothly for a months,just turn errors after last shutdown)

 

[RehabMan]

yes man, I read the part and do follow it,now reupload the correct CLOVER.zip.but there's a problem——the Boot verbose flash too fast that I can't photo all of them.

Your EFI/Clover/kexts/Other is a mess. Only "essential" kexts should be there. All kexts should be installed to the system volume.

You might have installed FakeSMC.kext to the system volume but forgot to install SATA-100-series-unsupported.kext.
Since InjectKexts=Detect, all EFI/Clover/kexts will be ignored by Clover if FakeSMC.kext is installed.

 

[crackself]

Your EFI/Clover/kexts/Other is a mess. Only "essential" kexts should be there. All kexts should be installed to the system volume.

You might have installed FakeSMC.kext to the system volume but forgot to install SATA-100-series-unsupported.kext.
Since InjectKexts=Detect, all EFI/Clover/kexts will be ignored by Clover if FakeSMC.kext is installed.

thanks,I installed FakeSMC.kext into L/E, theSATA-100-series-unsupported.kext onlyEFI/Clover/kexts/Other,but I can't get into L/E to fixed that,should I need re install the OS on SSD？