Contribute
Register

[Guide] Dell XPS 13 9350 macOS 10.12.1

Status
Not open for further replies.
itzmedavid89 said:
Hey guys im currently having a slight issue with my Dell Xps 13 9350 not being able to find my MyDigitalSsd NVMe 240GB.

I can see the NVMe when I push F12 under the legacy section

Im able to boot off of my USB drive and navigate through the installation but when I select disk utility to format my SSD it doesn't display my newly installed NVMe SSD.

Note: My MVMe is fresh out of the box with nothing installed on it.

I've been roaming around the forums and I can seem to figure it out.

I've downloaded the Clover.zip file from maxexcloo on page one and i followed his instruction on how to replace the /EFI/CLOVER/ folder with the one attached to this post.

Thanks!
Click to expand...

https://github.com/RehabMan/patch-nvme
 
Silence720 said:
Hi - I have the 6560 and using your v2 and thank you for all of your work. One of my problems is that when I reboot after a fresh install with kexts my hard drive won't reboot and it requires another fresh install. I can't determine what's causing it but it started when I started using your clover. I thought it could be the audio? Your version of voodoohda is the only one where I was able to get the headphone jack to work so was thinking it could be something to do with it?. I have tried leaving hwp off because I know that has caused some people some issues and still have the same.

It happens when I close the lid, open it and then restart.

Thanks!
Click to expand...
Remove every FakeSMC-related kexts and use the one from v1. Already fixed that in v3, but testing it for now.
 
RehabMan said:
Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.
Click to expand...

Output from command set one:
Code: 
Last login: Tue Dec 20 03:41:34 on ttys000

Hermess-MacBook-Pro:~ hermes$ kextstat|grep -y acpiplat

   13    2 0xffffff7f82ebd000 0x60000    0x60000    com.apple.driver.AppleACPIPlatform (5.0) B8468080-CED9-30EA-B151-33368AF9555B <12 11 7 6 5 4 3 1>

Hermess-MacBook-Pro:~ hermes$ kextstat|grep -y appleintelcpu

Hermess-MacBook-Pro:~ hermes$ kextstat|grep -y applelpc

Hermess-MacBook-Pro:~ hermes$ kextstat|grep -y applehda

Code: 
Last login: Tue Dec 20 03:42:09 on ttys000
Hermess-MacBook-Pro:~ hermes$ sudo touch /System/Library/Extensions && sudo kextcache -u /
Password:
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext UVC2FaceTimeHD.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelBacklight.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_LPCSensors.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_CPUSensors.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_ACPISensors.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2SmartTouchPad.kext
kext file:///System/Library/Extensions/AppleHDADisabler.kext/ is in hash exception list, allowing to load
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext
KernelCache ID: EB6278B13823DBF495558AADBC38AB32
symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795>
Should we continue here? 2 copying //System/Library/Caches/com.apple.corestorage/EncryptedRoot.plist.wipekey to /Volumes/Recovery HD/com.apple.boot.P/System/Library/Caches/com.apple.corestorage/EncryptedRoot.plist.wipekey: No such file or directory
Should we continue here? 2 copying //System/Library/Caches/com.apple.corestorage/EFILoginLocalizations to /Volumes/Recovery HD/com.apple.boot.P/System/Library/Caches/com.apple.corestorage/EFILoginLocalizations: No such file or directory

Hopefully I followed all steps correctly.

ioreg and Clover folders are attached as two separate zips.

EDIT: I should also mention that when looking at system information I have no PCI cards or devices listed.
 

Attachments

  • CLOVER.zip
    5.1 MB · Views: 126
  • ioreg.zip
    405 bytes · Views: 78
Last edited:
0Olympus0 said:
Output from command set one:
Code: 
Last login: Tue Dec 20 03:41:34 on ttys000

Hermess-MacBook-Pro:~ hermes$ kextstat|grep -y acpiplat

   13    2 0xffffff7f82ebd000 0x60000    0x60000    com.apple.driver.AppleACPIPlatform (5.0) B8468080-CED9-30EA-B151-33368AF9555B <12 11 7 6 5 4 3 1>

Hermess-MacBook-Pro:~ hermes$ kextstat|grep -y appleintelcpu

Hermess-MacBook-Pro:~ hermes$ kextstat|grep -y applelpc

Hermess-MacBook-Pro:~ hermes$ kextstat|grep -y applehda

Code: 
Last login: Tue Dec 20 03:42:09 on ttys000
Hermess-MacBook-Pro:~ hermes$ sudo touch /System/Library/Extensions && sudo kextcache -u /
Password:
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext UVC2FaceTimeHD.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelBacklight.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_LPCSensors.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_CPUSensors.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_ACPISensors.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2SmartTouchPad.kext
kext file:///System/Library/Extensions/AppleHDADisabler.kext/ is in hash exception list, allowing to load
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext
KernelCache ID: EB6278B13823DBF495558AADBC38AB32
symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795>
Should we continue here? 2 copying //System/Library/Caches/com.apple.corestorage/EncryptedRoot.plist.wipekey to /Volumes/Recovery HD/com.apple.boot.P/System/Library/Caches/com.apple.corestorage/EncryptedRoot.plist.wipekey: No such file or directory
Should we continue here? 2 copying //System/Library/Caches/com.apple.corestorage/EFILoginLocalizations to /Volumes/Recovery HD/com.apple.boot.P/System/Library/Caches/com.apple.corestorage/EFILoginLocalizations: No such file or directory

Hopefully I followed all steps correctly.

ioreg and Clover folders are attached as two separate zips.

EDIT: I should also mention that when looking at system information I have no PCI cards or devices listed.
Click to expand...

The ioreg is corrupt. You didn't use IORegistryExplorer v2.1.
Your EFI/Clover is missing the entire ACPI directory.

But to answer your question regarding WiFi... assuming you're running macOS (not possible to verify due to wrong/corrupt ioreg), you do not have a required patch for Brcm4360. On 10.12, the 'fcvo' patch by the-darkvoid is required.
 
itzmedavid89 said:
Thanks RehabMan for the reply but how do i install it? Do i install the new patched HackrNVMeFamily-10_11_5.kext to my USB? Because right now I cant even boot into Sierra from my laptop.

By installing it to i just copy and paste it into the Kext folder in the first post?
Click to expand...

You are posting in the Sierra forum. Why are you asking about 10_11_5?

Current Sierra 10.12.2 HackrNVMeFamily would be HackrNVMeFamily-10_12_2.kext.
And as per README, you cannot use HackrNVMeFamily for the macOS installer unless you use the class-code spoof.
Are you planning to use the class-code spoof?
 
RehabMan said:
You are posting in the Sierra forum. Why are you asking about 10_11_5?

Current Sierra 10.12.2 HackrNVMeFamily would be HackrNVMeFamily-10_12_2.kext.
And as per README, you cannot use HackrNVMeFamily for the macOS installer unless you use the class-code spoof.
Are you planning to use the class-code spoof?
Click to expand...


Whoops sorry that was a typeo, I have a copy of Sierra on a usb drive.

Right now I'm willing to do anything as of right now I can't even install macOS, because i can't find my Nvme add when I choose where to install Sierra on

Sorry this is my first hackintosh build
 
itzmedavid89 said:
Whoops sorry that was a typeo, I have a copy of Sierra on a usb drive.

Right now I'm willing to do anything as of right now I can't even install macOS, because i can't find my Nvme add when I choose where to install Sierra on

Sorry this is my first hackintosh build
Click to expand...

Without the class-code spoof, you cannot use HackrNVMeFamily on 10.12.x.
Instead you must add the IONVMeFamily patches (appropriate to your macOS version) to your own config.plist.
 
I apologize upfront for the noobie question, but I'm trying to build a kext using Rehabman's Github for Voodoo PS2. I have Xcode and opening the folder and simply building it, but it doesn't seem to be working correctly. Any suggestions on how to successfully build it with the most recent changes that were committed?
 
Z370 i7 8700K XFX RX 570
ROG MAXIMUS X HERO (WI-FI AC) |  i7 8700K |  Radeon RX 570 RS XXX Edition
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top