Lenovo Z500 i7 Laptop Yosemite 10.10.1 Test

[titosolo]

Ok thanks man! All works very fast also after the update to el capitan. The only one thing is deep sleep mode. I enabled also -gux_defer_usb2 and with Yosemite worked to enable the sleep mode, but now doesn't work on El Capitan.

 

[RehabMan]

Ok thanks man! All works very fast also after the update to el capitan. The only one thing is deep sleep mode. I enabled also -gux_defer_usb2 and with Yosemite worked to enable the sleep mode, but now doesn't work on El Capitan.

GenericUSBXHCI.kext not recommended on 10.11 (-gux_defer_usb2 is specific to that kext). Remove.

As for "instant wake", read ACPI patching guide: http://www.tonymacx86.com/el-capitan-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

 

[titosolo]

I removed GenericUSBXHCI.kext but AppleUSBXHCI.kext doesn't appear in the extension Folder.

Yesterday is used "sudo pmset -a standby 0 && sudo pmset -a autopoweroff 0" becouse after sleep the computer was frozen.

 

[RehabMan]

I removed GenericUSBXHCI.kext but AppleUSBXHCI.kext doesn't appear in the extension Folder.

AppleUSBXHCI.kext is a plugin of IOUSBFamily.kext.

Yesterday is used "sudo pmset -a standby 0 && sudo pmset -a autopoweroff 0" becouse after sleep the computer was frozen.

Sleep requires correct ACPI patches and implementation of native power management.

 

[alexey.kuz]

Hello. I want to share my experience hakintosh installation z500.
This is my first experience, I will be happy to assist in correcting errors. Sorry for my bad English.

My hardware:
CPU:Core i7 3520m Ivy Bridge;
GPU:HD4000/GeForce GT740m - nvidia is disabled in the BIOS. The plans to use to disable the DSDT
WLAN+BT: Intel Centrino Wireless-N 2230 - replaced by Atheros AR5B195 (AR9285+AR3011) - The forum helped to remove the white list in the BIOS.
LAN:Realtek RTL8139/810x - It works well with RealtekRTL8100.kext;
AUDIO: Realtek ALC269 - I use the easiest option - VoodooHDA ;
Card Reader: Realtek USB 2.0 Card Reader - does not work;
Elan touchpad - I use ApplePS2SmartTouchPad.kext;

What does not work:
Nvidia - will not work;
Sound HDMI - I think you need to use a sound AppleHDA;
Cardreader - will not work;
VGA Port;
Bluetooth - I do not know the reason (I use BTFirmwareUploader.kext). Sometimes included, sometimes defined, but the device does not see, sometimes the system does not see.*
Sleep - wakes up after 1 second. So do not sleep when you close the cap.*
Invalid calculated battery time (see screenshot)
View attachment 178721

* these problems were not in the 10.10

DSDT:
From patch I used recommended in this guide. For brightness - this patch. For battery - this patch.

NOTE:
Brightness slider works only with this kext (ACPIBacklight.kext) - New IntelBacklight I do not work. Changing with the keyboard always works without problems.


I enclose my kext, DSDT and clover config files.

 

[RehabMan]

Most of your issues are covered in the FAQ.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html